Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Corvair Electrics

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith-List
View previous topic :: View next topic  
Author Message
Jaybannist(at)cs.com
Guest





PostPosted: Mon Jan 08, 2007 6:07 am    Post subject: Corvair Electrics Reply with quote

Listers:

I know that there are a lot of builders out there that are using Corvair engines, and I also have one on order from William Wynne. I am in the process of developing my overall electrical plan (601XL), but I have zero electrical information on the Corvair engine. Does anyone have a WW-recommended electrical diagram for the Corvair that they would be willing to share?

Jay in Dallas
Do not archive


- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List
Back to top
dbortol



Joined: 02 Sep 2006
Posts: 46

PostPosted: Mon Jan 08, 2007 7:11 am    Post subject: Corvair Electrics Reply with quote

Jay,

Have you looked at Mark Langford's web site? He came up with the idea
of using a single switch to swap both the fuel and ignition systems.
WW's plane is set up similarly. William recommends an oil pressure
switch on one of the fuel pumps, that Mark doesn't have on his plane.

The link to Mark's electrical diagram is
http://home.hiwaay.net/~langford/electrical/index.html

Dino Bortolin

On 1/8/07, Jaybannist(at)cs.com <Jaybannist(at)cs.com> wrote:
Quote:


Listers:

I know that there are a lot of builders out there that are using Corvair
engines, and I also have one on order from William Wynne. I am in the
process of developing my overall electrical plan (601XL), but I have zero
electrical information on the Corvair engine. Does anyone have a
WW-recommended electrical diagram for the Corvair that they would be willing
to share?

Jay in Dallas
Do not archive



- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List
Back to top
View user's profile Send private message
dbortol



Joined: 02 Sep 2006
Posts: 46

PostPosted: Mon Jan 08, 2007 7:13 am    Post subject: Corvair Electrics Reply with quote

Jay,

Have you looked at Mark Langford's web site? He came up with the idea
of using a single switch to swap both the fuel and ignition systems.
WW's plane is set up similarly. William recommends an oil pressure
switch on one of the fuel pumps, that Mark doesn't have on his plane.
I'm sure the electrical system will be covered in WW's 601
installation manual when it eventually gets released.

The link to Mark's electrical diagram is
http://home.hiwaay.net/~langford/electrical/index.html

Dino

On 1/8/07, Jaybannist(at)cs.com <Jaybannist(at)cs.com> wrote:
Quote:


Listers:

I know that there are a lot of builders out there that are using Corvair
engines, and I also have one on order from William Wynne. I am in the
process of developing my overall electrical plan (601XL), but I have zero
electrical information on the Corvair engine. Does anyone have a
WW-recommended electrical diagram for the Corvair that they would be willing
to share?

Jay in Dallas
Do not archive



- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List
Back to top
View user's profile Send private message
btucke73(at)yahoo.com
Guest





PostPosted: Mon Jan 08, 2007 8:42 am    Post subject: Corvair Electrics Reply with quote

Jay,

Join the Corvair list at:

http://www.corvaircraft.com/

Click on "Join the e-mail list."

Ask the guys there. You will probably receive
several CAD electrical system diagrams. They will
range from the super simple (Mine) to ridiculously
redundant (Dave Morris). All you really need to make
it work is starter power and switch power, Ignition
power and senders. Beyond that, you can get real
creative...

VR/

Brandon Tucker
HDS / TD / Corvair
46 hours

__________________________________________________


- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group