gmcjetpilot
Joined: 04 Nov 2006
Posts: 170
|
 Posted: Tue Jan 09, 2007 2:16 pm Post subject: Transpo V1200 Voltage Regulator (EXCELLENT!) |
 |
|
>Subject: Transpo V1200
| Quote: | Bob and others, I have the regulator that is
described in the following data sheet.
|
http://www.aeroelectric.com/Mfgr_Data/Regulators/Transpo/V1200_Transpo.pdf
>It is a little difficult to tell from the picture, but the
| Quote: | connection tabs are labeled like this left to right
and top to bottom: F S A I B-
|
A = switch power to ALT switch
-B= ground
S= (power signal/switch to regulator)
I= Indicator LIGHT (ground side)
F=field
>I have the F connected to the alternator field, the
| Quote: | A connected to the 5A circuit breaker, the A and
S are jumpered together.
|
Sounds about right. Since we have a master switch
and just kill the whole electrical system that is fine.
I might try it with out the jump.
>I have no idea what to do with the tab labeled
Just leave it disconnected, Stator takes voltage off
the neutral junction to turn a relay on (internal to
the voltage regulator). JUST TO BE CLEAR you
have both S and Stator output. Leave Stator OUT
alone.
>"B-". I suspect that the "B-" is the ground, but
Correct.
************************************************************
Transpo 1200!
EVERY ONE THIS IS A GREAT REGULATOR. IT IS
10000 TIMES BETTER THAN A [quote][b]
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
