JDELPESO(at)terra.es
Guest
|
 Posted: Tue Jan 16, 2007 1:57 am Post subject: LEVEL THE HORIZONTAL STABILIZER |
 |
|
I think this question and answer from van´s can be usefull for some of
you
Asunto: Re: LEVEL THE HORIZONTAL STABILIZER
go with the drawing .....van's
Subject: LEVEL THE HORIZONTAL STABILIZER
Copies to: jdelpeso(at)teleline.es
Hi,
Acording with the instructions on page 8-17 to set the zero incidence
angle to the fuselage, I have to do the following steps:
1.- Set the F-810E 1/8" spacers underneath the front spar.
2.- Set a temporary 3/16" spacer underneath the rear spar.
3.- Check a zero incidence angle placing a ....... 1/16"........
spacer on top of the rear spar and use a carpenter level between
spars.
According with drawing 41 (leveling of horizontal stabilizer), once I
have leveled the stabilizer (steps 1 and 2 of the other paragraph), I
check the zero incidence placing a 1/8" spacer over the front spar
and
1/4" spacer over the rear spar, so the increment is...... 1/8".... In
the instructions on page 8-17 the increment is 1/16".
Wich value is the right one?
Thanks
Jose del Peso #80981
Prueba el Nuevo Correo Terra; Seguro, rápido, fiable.
Prueba el correo Terra ( http://www.terra.es/correo ); Seguro, rápido, fiable.
| | - The Matronics RV-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
