Matronics Email Lists :: View topic - RV-10 - Bushing installation in flap supports

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

RV-10 - Bushing installation in flap supports

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

Tim_Lewis(at)msm.umr.edu
Guest

Posted: Mon Jan 15, 2007 4:37 pm Post subject: RV-10 - Bushing installation in flap supports

Listers,

 

 There's apparently a revision to RV-10 plans page 22-8 (rev 1) that is current, but has not been posted on the "revisions" page at Van's web site.   It involves the little brass bushings that go in the flap supports. Attached photo shows the revision.

 

 Tim

  	  Quote: 	
		  

-- 

Tim Lewis -- HEF (Manassas, VA)

RV-6A N47TD -- 850 hrs

RV-10 #40059 under construction 	
 

 

 ------

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

IMG_0406.jpg

Description:

Filesize:

269.84 KB

Viewed:

144 Time(s)

deruiteraircraftservices(
Guest

Posted: Tue Jan 16, 2007 3:47 am Post subject: RV-10 - Bushing installation in flap supports

Hi Tim,

  

 You have one of the earlier kits out of the first  two batches that were produced by Van's judging by your kit number. From at  least number 400272, maybe earlier REV 1 is in the kit.

  

 Marcel

 [quote]   ---

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

billderou(at)yahoo.com
Guest

Posted: Tue Jan 16, 2007 1:05 pm Post subject: RV-10 - Bushing installation in flap supports

I have kit #29 and did receive the bushings. It was a while ago but I think they may have been shipped seperately. The bushings did fit perfectly without modifications but must be inserted after the wing skin is complete as the slot in the skin will not pass through the flap support with the bushing installed.

   

  Bill

  billderou(at)yahoo.com (billderou(at)yahoo.com)

  N939SB, flying



RAS <deruiteraircraftservices(at)btinternet.com> wrote:

  [quote]        Hi Tim,

   

  You have one of the earlier kits out of the first two batches that were produced by Van's judging by your kit number. From at least number  400272, maybe earlier REV 1 is in the kit.

   

  Marcel

  [quote]  ---

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

John Ackerman

Joined: 19 Jun 2006
Posts: 130
Location: Prescott, AZ

Posted: Tue Jan 16, 2007 8:38 pm Post subject: RV-10 - Bushing installation in flap supports

On kit 458, the skins can be made to pass over the installed bushings, but it will make you pucker!John



On Jan 16, 2007, at 2:05 PM, Bill DeRouchey wrote:

[quote]I have kit #29 and did receive the bushings. It was a while ago but I think they may have been shipped seperately. The bushings did fit perfectly without modifications but must be inserted after the wing skin is complete as the slot in the skin will not pass through the flap support with the bushing installed.

 

Bill

[b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum