 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Deems Davis
Joined: 09 Jan 2006
Posts: 925
|
 Posted: Wed Jan 17, 2007 6:58 am Post subject: Spelling/Typing lessons offered free of charge! |
 |
|
Whaz a matta caint yu tak a jok!
(Kitlog could do with a spell checker!)
I've been looking for someone that could laser/waterjet cut new
subpanels for my instrument panel, I hand cut the originals and am not
happy with them. I got prices any where up to $400. I was having a
problem accurately recreating the outlines of the subpanels in a CAD
program. When it dawned on me to call Aerotronics where I purchased the
fiberglass panel from (duh). I called Gary Wirrell, who not only agreed
to cut them but offered to do it for FREE!!!!! Gary has been monitoring
some of the msg boards and had seen previous posts favorable to
Aerotronics and wanted to return a favor. WOW! and just when I was
beginning to think that customer service was dead. As you know I'm
building my own panel, and other than purchasing the fiberglass panel
piece from Gary, that's it. But Gary did a CAD layout of my panel to
make sure the OP Tech EFIS would fit, and then with the remake of the
sub-panels, he's done several more! He's also provided several EXTREMELY
Valuable suggestions, that I wouldn't have thought of otherwise. and Oh
yeh, he's doing all of this in the midst of the D2A disaster! So I'm
again returning a favor by sharing my experience with the board.
My next project (an F1 rocket) will have an Aerotronics built panel!
THANKS AGAIN Gary!!!!!
Deems Davis # 406
Finishing - ( A Misnomer ! )
http://deemsrv10.com/
Rick wrote:
| Quote: | .iF ewe knew whut I meen!!! 
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
indigoonlatigo(at)msn.com
Guest
|
| Posted: Wed Jan 17, 2007 8:57 am Post subject: Spelling/Typing lessons offered free of charge! |
|
|
Why an F1 rocket---just go straight to the ViperJet. What are you thinking!
Time is precious so stop spinning your wheels.
You could paint your words on the side of that plane and because it goes so
fast, no one would be able to tell you mispelled the words.
hou knees spel chek aniway!
John
| Quote: | From: Deems Davis <deemsdavis(at)cox.net>
Reply-To: rv10-list(at)matronics.com
To: rv10-list(at)matronics.com
Subject: Spelling/Typing lessons offered free of charge!
Date: Wed, 17 Jan 2007 07:57:45 -0700
Whaz a matta caint yu tak a jok!
(Kitlog could do with a spell checker!)
I've been looking for someone that could laser/waterjet cut new subpanels
for my instrument panel, I hand cut the originals and am not happy with
them. I got prices any where up to $400. I was having a problem accurately
recreating the outlines of the subpanels in a CAD program. When it dawned
on me to call Aerotronics where I purchased the fiberglass panel from
(duh). I called Gary Wirrell, who not only agreed to cut them but offered
to do it for FREE!!!!! Gary has been monitoring some of the msg boards and
had seen previous posts favorable to Aerotronics and wanted to return a
favor. WOW! and just when I was beginning to think that customer service
was dead. As you know I'm building my own panel, and other than purchasing
the fiberglass panel piece from Gary, that's it. But Gary did a CAD layout
of my panel to make sure the OP Tech EFIS would fit, and then with the
remake of the sub-panels, he's done several more! He's also provided
several EXTREMELY Valuable suggestions, that I wouldn't have thought of
otherwise. and Oh yeh, he's doing all of this in the midst of the D2A
disaster! So I'm again returning a favor by sharing my experience with the
board.
My next project (an F1 rocket) will have an Aerotronics built panel! THANKS
AGAIN Gary!!!!!
Deems Davis # 406
Finishing - ( A Misnomer ! )
http://deemsrv10.com/
Rick wrote:
>.iF ewe knew whut I meen!!!
>
>
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
bsponcil(at)belinblank.or
Guest
|
| Posted: Wed Jan 17, 2007 10:44 am Post subject: Spelling/Typing lessons offered free of charge! |
|
|
It's too bad that we've come to expect so little from the people we give
money to but I had a similar experience with Cleaveland Tools the other day.
I needed a threaded #12 drill bit but really nothing else. Naturally the
bit is like $2 and the cheapest shipping on the website is $5. But what are
you going to do, if you need the bit you need the bit. So I ordered two of
'em, entered my CC etc and later that day someone from Cleaveland called to
ask if it was ok to send the bits 1st class mail for $.50 instead of
charging the $5.
It's only $5 in a $100,000 project but service like that goes a long way in
my book.
-Brian
Iowa City, IA
#40497
Finishing Empennage
---
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
indigoonlatigo(at)msn.com
Guest
|
| Posted: Wed Jan 17, 2007 11:09 am Post subject: Spelling/Typing lessons offered free of charge! |
|
|
Some of them will tape the bit or tool inside their catalog and ship it that
way to also save you $$$$.
It is a real nice feeling when people are watching out for you.
JOhn
[quote]From: "Brian Douglas" <bsponcil(at)belinblank.org>
Reply-To: rv10-list(at)matronics.com
To: <rv10-list(at)matronics.com>
Subject: Re: Spelling/Typing lessons offered free of charge!
Date: Wed, 17 Jan 2007 12:43:24 -0600
It's too bad that we've come to expect so little from the people we give
money to but I had a similar experience with Cleaveland Tools the other
day. I needed a threaded #12 drill bit but really nothing else. Naturally
the bit is like $2 and the cheapest shipping on the website is $5. But
what are you going to do, if you need the bit you need the bit. So I
ordered two of 'em, entered my CC etc and later that day someone from
Cleaveland called to ask if it was ok to send the bits 1st class mail for
$.50 instead of charging the $5.
It's only $5 in a $100,000 project but service like that goes a long way in
my book.
-Brian
Iowa City, IA
#40497
Finishing Empennage
---
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
