Matronics Email Lists :: View topic - Electrolumenesent Light.

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Electrolumenesent Light.

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

jack.byrne(at)bigpond.com
Guest

Posted: Sat Mar 03, 2007 3:12 pm Post subject: Electrolumenesent Light.

Bob

  

 I finally got around to daisy chaining my lighting  strips. It works well. I had a bit of trouble working out how to attach the  wires to the strips though.

  

 I found a strip of PCB material with 6 lugs  attached to it. They were held in place by inserting them through the holes in  the PCB material and folding over 4 small ears. Just a matter of unfolding the  ears and removing them from the PCB.

  

 A nail through the lighting strip and attaching the  lugs worked well, solder on your wire prior to attaching the lugs to the  illumenesent strip.  

  

 Chris Byrne

 SYDNEY

   [quote][b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum