matronics(at)cencula.com
Guest
|
 Posted: Sat Mar 17, 2007 7:07 pm Post subject: RV7-List: Z-bracket height (again) - Help! |
 |
|
Please forgive the cross-posting, but I sent this to the RV7 list first.
Afterward, I thought some of the other RV builders might have some good
ideas.
Guys, I'm stumped!
My when I set my leading edges on the spar, the leading edge skin butts
right up to the main wing skins (both top and bottom) perfectly. With the
tanks, it's a different story. I've been trying to figure out what's
causing the gap and the only thing I can come up with is that the
Z-brackets are a little too high.
If y'all have a couple minutes and would be willing to look at what I've
tried, I'd sure appreciate any feedback how to fix it. At this time, the
only solution I can think of is to put a joggle in the web of the
Z-brackets which will effectively shorten them by .040 inch. That seems
like it'll be pretty difficult, though so I'm really hoping for a better
solution.
Here's some pics that document the problem:
http://www.our7a.com/20070315.html
http://www.our7a.com/20070317.html
Thanks,
Mike Cencula
| | - The Matronics RV-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
