Matronics Email Lists :: View topic - Z-bracket height (again)

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Z-bracket height (again) - Help!

Matronics Email Lists Forum Index -> RV-List

View previous topic :: View next topic

Author Message

dan(at)rvproject.com
Guest

Posted: Sun Mar 18, 2007 4:51 pm Post subject: Z-bracket height (again) - Help!

Check the aft flange bend angle on the fuel tank ribs.  If it's not 90 

degrees, then it pushes the baffle "aft" and causes the problem you're 

seeing.



Also make sure the fuel tank ribs are well seated inside the tank skin. 

That means all flanges on all tank ribs are square, and the "flats" around 

the nose aren't causing "high spots" that prevent the nose of the rib from 

seating all the way fwd.



)_( Dan

RV-7 N714D (1230 hours)

www.rvproject.com / www.weathermeister.com / www.weighmyplane.com



---

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum