Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Lycoming IO540 engine mounts

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
KiloPapa



Joined: 24 May 2006
Posts: 142
Location: Pearblossom, CA

PostPosted: Fri May 04, 2007 8:58 pm    Post subject: Lycoming IO540 engine mounts Reply with quote

Are all four of the engine mount ears of the small ear type? To clarify, if
one had an engine from an airframe which used the large mounts would
a total of 4 small ear mounts be needed?

In the experience of the list, what has the availability of used small ear mounts been?

Also, do the C4B5 540's have the crank counterweights for the CS prop as the normal configuration?

Thanks,

Kevin
40494


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message
dav1111(at)suddenlink.net
Guest





PostPosted: Sat May 05, 2007 2:27 am    Post subject: Lycoming IO540 engine mounts Reply with quote

If anyone is short a single small engine mount ear I have one available. My buddy, Terry Cole, who passed away while building an RV-10 had a big stack of misc. engine parts from multiple engines that he acquired over the past 10 years and in going through multiple boxes one of the IO-540 small ears was found.

Russ Daves
N710RV - 40044
First Flight 7/28/06
[quote][b]


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
jesse(at)saintaviation.co
Guest





PostPosted: Sat May 05, 2007 5:07 am    Post subject: Lycoming IO540 engine mounts Reply with quote

You would need all 4. They shouldn't be hard to come by used, since some
planes still need this large hole mounts (I think the Rocket needs the large
hole). You could always buy them new in a pinch (and might even get them
cheaper than buying a whole new engine).

Do not archive.

Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com
www.saintaviation.com
Cell: 352-427-0285
Fax: 815-377-3694

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
rene(at)felker.com
Guest





PostPosted: Sat May 05, 2007 7:43 am    Post subject: Lycoming IO540 engine mounts Reply with quote

I would like to gather opinions on two topics, now that I am getting close
to having to do both of them.

Where to place the magnetometer's, yes I will have two. I built a shelf in
front of the first bulkhead behind the baggage compartment bulkhead, but I
am having second thoughts and want some opinions. I am thinking about
putting them out in the wingtips, first forward bay inboard.
Second, what are y'all using on the top of the wings in the walk area (anti
slip)

Any opinions are appreciated.

Rene'
N423CF
40322
Finish kit...or something like that
801-721-6080


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
bcondrey



Joined: 03 Apr 2006
Posts: 580

PostPosted: Sat May 05, 2007 3:25 pm    Post subject: Re: Lycoming IO540 engine mounts Reply with quote

Kevin,

Short answer is yes.

Longer answer is that the "4" as the second digit in the suffix specifies the counterweight configuration, so the C4B5 has the same counterweight configuration as the D4A5 engine.

Bob #40105


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group