Matronics Email Lists :: View topic - source for ready-made hoses

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

source for ready-made hoses

Matronics Email Lists Forum Index -> RV-List

View previous topic :: View next topic

Author Message

sportav8r(at)gmail.com
Guest

Posted: Mon May 14, 2007 4:53 am Post subject: source for ready-made hoses

It's been ten years - time to replace the aging home-made oil and fuel hoses FWF.



This time I want to go with "lifetime" teflon hoses and professionally installed fittings and firesleeve, with pressure testing, so I'm looking for a good vendor to provide ready-made hoses.  Any recommendations as far as price and service, turn-around time and so forth? 



Thanks,



-Bill B / Stormy

  [quote][b]

Bruce(at)glasair.org
Guest

Posted: Mon May 14, 2007 5:29 am Post subject: source for ready-made hoses

If you want  aircraft certified hoses try Sacramento Sky Ranch. You migh also try your local  automotive speed shop.

  

  

 

Bruce

www.glasair.org

   [quote]   

   --

Tailgummer(at)aol.com
Guest

Posted: Mon May 14, 2007 6:07 am Post subject: source for ready-made hoses

Bill, I had all my hoses profesionally made , firesleeved,  pressure tested and tagged by  Aviall Aerospace in Van Nuys, Ca.  I would do it again in a heartbeat.  Reall nice people to work with.  Try Tim Temple (at) (818) 997-5063.

                                                                                   John D'Onofrio RV8 N585JD



See what's free at AOL.com. 

  [quote][b]

bmeyette

Joined: 14 Mar 2007
Posts: 72
Location: Cornish, NH

Posted: Mon May 14, 2007 6:22 am Post subject: source for ready-made hoses

I had good service, quick turnaround, and good products from Southeastern Hose  

<![if !supportEmptyParas]> <![endif]>  

http://www.sehose.com/  

<![if !supportEmptyParas]> <![endif]>  

brian  

<![if !supportEmptyParas]> <![endif]>  

http://brian76.mystarband.net/engineOct06.htm#oct12  

<![if !supportEmptyParas]> <![endif]>  

<![if !supportEmptyParas]> <![endif]>  

<![if !supportEmptyParas]> <![endif]>  

--

_________________
Brian Meyette, Cornish, NH

RV-7A QB tipup, supercharged Subaru STi engine, MT CS prop, all glass day/night/IFR panel, being built with solar and wind power

N432MM

http://brian76.mystarband.net/RV-7Ahome.htm

vft(at)aol.com
Guest

Posted: Mon May 14, 2007 9:40 am Post subject: source for ready-made hoses

I had these type hoses made up for my Rocket project by Precision Hose Technology (PHT) in Tulsa, OK . I'm very happy with the way they tyrned out however there are a few things you should take into consideration when using these. The first is that they do not have an unlimited service life. Only an unlimited shelf life. The second is these hose assemblies are much stiffer than standard hose assemblies so they really need to fit well. When I measured for mine I intentionently added and extra couple of inches thinking that any extra length could be used up by allowing the hose to bend a bit between the attach fitting as is normaly the case with standard hosed. I ended up having to send some back and redone to a shorter length. 

    

   BTW Precision gave me great customer service in dealing with all of this.

    

   Danny Melnik

 F1 #25

 Melbourne (FL) Rocket Factory

    

  

 --

bmeyette

Joined: 14 Mar 2007
Posts: 72
Location: Cornish, NH

Posted: Mon May 14, 2007 12:08 pm Post subject: source for ready-made hoses

Oh – and I almost forgot an important part – whoever you get them from, when you order them, be sure to specify OVERALL LENGTH – from the outer end of one nut to the outer end of the nut at the other end.   I had specified sealing surface to sealing surface when I ordered mine, and it causes confusion.   The hose makers expect lengths you give them are OAL.  

brian  

<![if !supportEmptyParas]> <![endif]>  

<![if !supportEmptyParas]> <![endif]>  

--

Vanremog(at)aol.com
Guest

Posted: Mon May 14, 2007 7:31 pm Post subject: source for ready-made hoses

In a message dated 5/14/2007 10:42:06 A.M. Pacific Daylight Time,  vft(at)aol.com writes:

  	  Quote: 	
		  I had    these type hoses made up for my Rocket project by Precision Hose Technology    (PHT) in Tulsa, OK . 	


 

 ====================

  

 Anyone have a phone number for them?

  

  

  

 GV (RV-6A N1GV O-360-A1A, C/S, Flying 845hrs, Silicon Valley,  CA)





See what's free at AOL.com. 

  [quote][b]

Kellym

Joined: 10 Jan 2006
Posts: 1705
Location: Sun Lakes AZ

Posted: Mon May 14, 2007 8:01 pm Post subject: source for ready-made hoses

www.aircrafthose.com



Vanremog(at)aol.com wrote:

 	  Quote: 	
		   In a message dated 5/14/2007 10:42:06 A.M. Pacific Daylight Time, 

 vft(at)aol.com writes:



     I had these type hoses made up for my Rocket project by Precision

     Hose Technology (PHT) in Tulsa, OK .



 ====================

  

 Anyone have a phone number for them?

  

  

  

 GV (RV-6A N1GV O-360-A1A, C/S, Flying 845hrs, Silicon Valley, CA)



 ------------------------------------------------------------------------

 See what's free at AOL.com 

 <http://www.aol.com?ncid=AOLAOF00020000000503>.

 *

 *

_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor # 5286
KCHD

Vanremog(at)aol.com
Guest

Posted: Mon May 14, 2007 8:13 pm Post subject: source for ready-made hoses

In a message dated 5/14/2007 9:02:50 P.M. Pacific Daylight Time,  kellym(at)aviating.com writes:

  	  Quote: 	
		  www.aircrafthose.com



Vanremog(at)aol.com wrote:

 	  Quote: 	
		   In a    message dated 5/14/2007 10:42:06 A.M. Pacific Daylight Time, 

    vft(at)aol.com writes:



     I had these type hoses    made up for my Rocket project by Precision

     Hose    Technology (PHT) in Tulsa, OK .



    ====================

  

 Anyone have a phone number for    them?

	

	


 

 ====================================

  

 That's an odd phone number.  I have the website listed in the Yeller  Pages, but was hoping for a phone number to complete the data.  Do not  archive.

  

 -GV



See what's free at AOL.com. 

  [quote][b]

Kellym

Joined: 10 Jan 2006
Posts: 1705
Location: Sun Lakes AZ

Posted: Mon May 14, 2007 8:23 pm Post subject: source for ready-made hoses

I guess it is just to way too hard to click on a link for page that has 

the phone numbers right front and center.

919-835-3660, 800-331-5946

Vanremog(at)aol.com wrote:

 	  Quote: 	
		   In a message dated 5/14/2007 9:02:50 P.M. Pacific Daylight Time, 

 kellym(at)aviating.com writes:



     www.aircrafthose.com



     V

     > Anyone have a phone number for them?



 ====================================

  

 That's an odd phone number.  I have the website listed in the Yeller 

 Pages, but was hoping for a phone number to complete the data.  Do not 

 archive.

  

 -GV



 ------------------------------------------------------------------------

 See what's free at AOL.com 

 <http://www.aol.com?ncid=AOLAOF00020000000503>.

 *

 *

_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor # 5286
KCHD

Vanremog(at)aol.com
Guest

Posted: Mon May 14, 2007 9:27 pm Post subject: source for ready-made hoses

In a message dated 5/14/2007 9:24:47 P.M. Pacific Daylight Time,  kellym(at)aviating.com writes:

  	  Quote: 	
		  I guess    it is just to way too hard to click on a link for page that has 

the phone    numbers right front and center.

	


 

 ============================================

  

 You're right, the time I spend maintaining the Yeller Pages is of no  consequence and as a bonus I get to field potshots from pudknockers such as you.    

 GV (RV-6A N1GV O-360-A1A, C/S, Flying 844hrs, Silicon Valley,  CA)



See what's free at AOL.com. 

  [quote][b]

Display posts from previous:

	Matronics Email Lists Forum Index -> RV-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum