Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Aileron pushrod rubbing against aileron mounting bracket on

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
Tim Olson



Joined: 25 Jan 2007
Posts: 2879

PostPosted: Sat May 26, 2007 6:10 am    Post subject: Aileron pushrod rubbing against aileron mounting bracket on Reply with quote

Is it a rivet rubbing on a rivet, or the bar rubbing on a rivet?
Mine rubbed with the wings not mounted to the plane, where you got
an excess of supply of aileron movement. On the cradle I tried to
ensure that the rivet manufactured heads were toward eachother
as they are smaller and rounded and would be less prone to
touching and catching.

But, once mounted to the airplane and the wings and everything in
place, I don't get the movement required to get them to come together
like that. Depending on the locations and quantities of spacers,
you may be able too add/move/remove them as necessary to separate
those parts a touch too, as long as you're careful and think about
exactly what could be the ramifications. Additionally, on my
pushrods, I gave those shop heads a special squishing to keep them
from being s pronounced, but you may find it a complete non-issue
after you mount everything permanently on the fuselage.

If you're not mounted up yet, you may wish to just add that to
a checklist of things to check fully before you fly. You may
find no problem later.

Tim Olson - RV-10 N104CD - Flying
do not archive
MauleDriver wrote:
Quote:


After mounting my LH aileron and connecting the bellcrank to aileron
pushrod, I find that the pushrod rubs against a rivet shop head that is
part of the aileron mounting bracket. Anyone else run into this?

So far, I've dismounted it, checked all the spacers and washers per the
plans and remounted. It is still rubbing.

This shouldn't be too difficult to resolve but a solution isn't obvious
yet. Just looking for any similar experiences and approaches.

Bill "trying to close up the QB wings" Watson



- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group