Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Speeedster Wing Tips

Matronics Email Lists Forum Index -> Kitfox-List

View previous topic :: View next topic

Author Message

l.morris(at)tx.rr.com
Guest

Posted: Tue Jun 05, 2007 7:18 am Post subject: Speeedster Wing Tips

I'm to the point of installing the metal backing strips on my mod 4 Sptr.Previously in the manual I installed the backing strip on the inside of the #9 rib as instructed and that was for the standard wing tip(no mention on the speedster model).Now the backing strip for the speedster ti goes on  the outside of the rib.The can't be installed in one piece do to the adhisive around the spars.That's not my problem.The trailing edge has backing strips for the flaperon brackets.Do I stop short of those or continue to the end?If I go to the end,the added thickness my result in the rivets not being long enough to have a good grab unless I use longer rivets. ---Leon Morris/Classic 4/50%/ Flower Mound,TX

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Kitfox-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum