 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
josok-e(at)ukolo.fi
Guest
|
 Posted: Wed Jun 06, 2007 5:11 am Post subject: CHT sensors and temperatures, was costs 914 |
 |
|
Hi Graham,
Yes, i did close the gaps, although it could be done tighter. The problem
turned out to be no problem. I have 4 x CHT and 4 x EGT. The CHT sensors i
was monitoring are of the ring terminal type, and not the Rotax supplied
sensors. This morning i measured the CHT of the hottest cylinder the Rotax
way, and i can't get it over 95 C. The ring terminal CHT sensor then
reports 137 C and reacts much faster. The Rotax CHT sensor seems to
measure the cooling liquid temperature, it rises after shutdown, while the
ring type sensor drops immediately. So i have to apply a correction
factor. After the promised software upgrade of the Dynon 180 comes
available, I will be able to see both ways of measuring CHT.
Regards
--
workshopcam http://www.okhuijsen.org/plane
http://www.europaowners.org/kit600
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
 |
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
