Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Rocket jacking

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Rocket-List
View previous topic :: View next topic  
Author Message
Vince Frazier



Joined: 10 Jan 2006
Posts: 132

PostPosted: Tue Jul 17, 2007 5:54 am    Post subject: Rocket jacking Reply with quote

Rocket Jacking.

No, not a terrorist attack, or a porn site... but how to raise your
Rocket safely.

First let me say, don't you guys ever read my website? You are truly
missing out on the world's foremost source of Rocket info, the oldest
Rocket site out there and still the best. Prove me wrong. Wink

I had a worm clamp like Tom Martin describes fail on me while raising
the plane. It does work, but be sure to use a quality clamp if you do.
This was during the gear leg shortening described on my site... so I was
asking a lot of the little clamp.

Here's a couple shots of a pair of ordinary wing jacks being used under
the motor mount. I made a couple of simple saddle pads that fit the top
of the jacks and nested under the lower mount tube. This is a very
sturdy, safe way to lift your bird since it keeps the weight right next
to the gear... where it is normally found anyway!
http://www.vincesrocket.com/checking%20toe.jpg jack setup
http://www.vincesrocket.com/jacking%20the%20plane.jpg upper position
http://www.vincesrocket.com/jack%20pad.jpg jack pad

This is an EASY and STRONG jacking method. Weld a plate to an exhaust
clamp and stick a jack under it. I can almost hear the whining already,
"Ew, ew, won't that scratch my axle socket paint?" No, not if you're
careful. And it's much better than punching a hole in your wing if
you're tempted to use the wing jacks under the wing. I've used this
setup THREE times on my bird so far, and the paint is fine. But, touch
up the paint if you aren't so lucky. 'nuf said.
http://www.vincesrocket.com/jacking%20the%20gear%20leg.jpg exhaust clamp
jacking device

I'm not a big fan of using straps on the engine mount, although I did it
several times during construction when the total weight of the plane was
hundreds of pounds lower. Just don't use the lifting eye on the engine
unless you want to risk cracking the case. Ouch.

Vince


- The Matronics Rocket-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Rocket-List

_________________
Vince Frazier
3965 Caborn Road
Mount Vernon, IN 47620
812-464-1839 work
812-985-7309 home
F-1H Rocket, N540VF
http://vincesrocket.com/
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Rocket-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group