jb92563
Joined: 23 Mar 2007
Posts: 314
Location: Southern California
|
 Posted: Mon Jul 23, 2007 8:53 am Post subject: Ultrastar Home at last |
 |
|
Hi Guys,
I finally got my Ultrastar home....now Im Kolbing too!
It needs a bit of work to get it flight ready.
I has more hanger rash than I thought.....I will need to do a bunch of Polyfiber repairs to patch the 5 little(~1") tears hear and there.
I also have one big tear about 6" on top of the wing.
I have been reading about the process to make the repairs and it seems simple enough, so I'll need to get one of those Polyfiber repair/practice kits.
Anyone know of the best place to get one.
Was the US covered with the Light or Medium Polyfiber fabric?
The plane came with 2 Cuyuna 430's or UL11-02, not sure which they are yet, that have not run in about 5 years.
Seems like I might have one of each since one has a single module with 2 spark wires and the other has 2 modules with 1 spark wire each.
The ignition kill switch is disconnected from the engine and I read that using the wrong switch can destroy the CDI module, anyone know what I need so I don't fry the thing?
I'll take some pics of the CDI modules/wires and post tommorow in case anyone can identify the correct wires.
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________
Ray
Kolb UltraStar (Cuyuna UL-202)
Moni MotorGlider
Schreder HP-11 Glider
Grob 109 Motorglider
Do Not Archive |
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
