 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
papadaddyo(at)tampabay.rr
Guest
|
 Posted: Tue Jul 31, 2007 12:17 pm Post subject: Horizontal stab etc |
 |
|
For those that have already been past this intersection, would you suggest attaching the horizontal stab, vertical stab, and rudder assemblies prior to attaching to the fus. Seems to me that you could save some time by installing and rigging those items after attaching to the fus. Particularly since you have to disassemble those items to get the fairing on.
Comments.
Rick Leach
40397
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
jesse(at)saintaviation.co
Guest
|
| Posted: Tue Jul 31, 2007 10:15 pm Post subject: Horizontal stab etc |
|
|
You can save some time by waiting, but if you are in a space-limited area, then it might not be a bad idea to get them installed and rigged prior to attaching the cone to the fuse. I personally prefer installing the aft elevator control rod after I have all of the other rods installed in the tunnel. That way you only install it once. You will, however, want to fit the intersection fairing when you first install the emp parts to avoid having to remove them more than once.
Do not archive
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
www.saintaviation.com
Cell: 352-427-0285
Fax: 815-377-3694
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Rick Leach
Sent: Tuesday, July 31, 2007 4:16 PM
To: rv10-list(at)matronics.com
Subject: Horizontal stab etc
For those that have already been past this intersection, would you suggest attaching the horizontal stab, vertical stab, and rudder assemblies prior to attaching to the fus. Seems to me that you could save some time by installing and rigging those items after attaching to the fus. Particularly since you have to disassemble those items to get the fairing on.
Comments.
Rick Leach
40397 [quote] [b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
