Matronics Email Lists :: View topic - AeroElectric-Z13/8 ????

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

AeroElectric-Z13/8 ????

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

fstringham

Joined: 10 Jan 2006
Posts: 87

Posted: Tue Aug 21, 2007 10:55 am Post subject: AeroElectric-Z13/8 ????

I am wiring my RV7A using Z 13/8 as my basic scheme. I did change the scheme 

to use Z-25 as the SD-8 Aux Alternator controller and the B&C LR-3 as the 

controller of the main alternator (as shown on Z-12). I also have the Dynon 

EMS-120 which has an ammeter shunt to monitor electrical flow in one of 

three locations. I have choosen to place the shunt in the A position to 

monitor current flow into or out of the battery. Now the ???????



1. With all this said I would like to eliminate the two shunts that monitor 

the SD-8 and Main alternator in in their place use the inticator lights. 

Does this make sense? My argument is I just want to know when the failure of 

an alternator occures and then monitor battery current specifically.



2. Does the indicator light attach to the S704-1 at the NC location 

.....assuming that 1 above is ok to do.



Thanks in Advance for your help.



Frank (at) SGU   RV7A   Wiring in progress



_________________________________________________________________

Messenger Café — open for fun 24/7. Hot games, cool activities served daily. 

Visit now. http://cafemessenger.com?ocid=TXT_TAGHM_AugHMtagline

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckollsr(at)cox.net
Guest

Posted: Wed Aug 22, 2007 7:33 am Post subject: AeroElectric-Z13/8 ????

At 12:53 PM 8/21/2007 -0600, you wrote:



 	  Quote: 	
		  

<fstringham(at)hotmail.com>



I am wiring my RV7A using Z 13/8 as my basic scheme. I did change the 

scheme to use Z-25 as the SD-8 Aux Alternator controller and the B&C LR-3 

as the controller of the main alternator (as shown on Z-12). I also have 

the Dynon EMS-120 which has an ammeter shunt to monitor electrical flow in 

one of three locations. I have choosen to place the shunt in the A 

position to monitor current flow into or out of the battery. Now the ???????



1. With all this said I would like to eliminate the two shunts that 

monitor the SD-8 and Main alternator in in their place use the inticator 

lights. Does this make sense? My argument is I just want to know when the 

failure of an alternator occures and then monitor battery current specifically.



2. Does the indicator light attach to the S704-1 at the NC location 

......assuming that 1 above is ok to do.


	


    The diagrams are recommendations, not requirements.

    You can choose to install or any combination of

    monitoring and display tools for your electrical

    system.



    Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum