Matronics Email Lists :: View topic - prop spinner for a 680 commander

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

prop spinner for a 680 commander

Matronics Email Lists Forum Index -> Commander-List

View previous topic :: View next topic

Author Message

WINGFLYER1(at)aol.com
Guest

Posted: Tue Aug 21, 2007 7:05 am Post subject: prop spinner for a 680 commander

Hello Guys, looking for a prop spinner for my 680. I have the Metzger STC  prop conversion ( three blade spinner only). Do appreciate your help.  Gil





  [quote][b]

moe(at)rosspistons.com
Guest

Posted: Tue Aug 21, 2007 7:54 am Post subject: prop spinner for a 680 commander

Hi Gill,  

   

I have a spare spinner for my 680F(p) with three blade props.  If they are the same, we can probably do something.  

   

Regards,  

   

Moe  

         

  

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of WINGFLYER1(at)aol.com

 Sent: Tuesday, August 21, 2007 8:04 AM

 To: commander-list(at)matronics.com

 Subject: prop spinner for a 680 commander  

  

     

Hello Guys, looking for a prop spinner for my 680. I have the Metzger STC prop conversion ( three blade spinner only). Do appreciate your help. Gil  

  



 

     

AOL.com.  

  

     [quote]



href="http://www.matronics.com/Navigator?Commander-List">http://www.matronics.com/Navigator?Commander-List

href="http://forums.matronics.com">http://forums.matronics.com



[b]

WINGFLYER1(at)aol.com
Guest

Posted: Tue Aug 21, 2007 10:19 am Post subject: prop spinner for a 680 commander

Moe, how much do you want for the spinner? Thanks  Gil





  [quote][b]

moe(at)rosspistons.com
Guest

Posted: Tue Aug 21, 2007 11:46 am Post subject: prop spinner for a 680 commander

Gil,  

   

If memory serves correctly I paid $ 350.00 each for them, several years ago and obviously don’t want to loose money.  I have two, one is polished and the other is hard anodized a really ugly Army green.  Both appear to be in very good condition, although, the green one appears to be a little bit thicker around the screw holes, because it has not been polished. Your choice $ 350.00. Where do you live?  Finding a good box to ship in might be a little bit of a problem.  

   

Moe    

         

  

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of WINGFLYER1(at)aol.com

 Sent: Tuesday, August 21, 2007 11:19 AM

 To: commander-list(at)matronics.com

 Subject: Re: prop spinner for a 680 commander  

  

     

Moe, how much do you want for the spinner? Thanks Gil  

  



 

     

AOL.com.  

  

     [quote]



href="http://www.matronics.com/Navigator?Commander-List">http://www.matronics.com/Navigator?Commander-List

href="http://forums.matronics.com">http://forums.matronics.com



[b]

WINGFLYER1(at)aol.com
Guest

Posted: Tue Aug 21, 2007 11:58 am Post subject: prop spinner for a 680 commander

Moe, Before you ship the spinner, I need to make sure it fits the Metzger  STS conversion ( Three Bladed Prop. Is it the larger spinner(more than 14 inches  and can the thicker one be polished up? Thanks Gil p.s. My address is as  follows: Gil Walker 6104 Belle Rive Dr. Brentwood, Tn 37027 Trl. 615-373-5703  Cell 615-310 5030. If you will e-mail me your number I will call you and  discuss. Thanks 



Get a sneak peek of the all-new AOL.com.

  [quote][b]

moe(at)rosspistons.com
Guest

Posted: Tue Aug 21, 2007 3:36 pm Post subject: prop spinner for a 680 commander

The phone number here at my office is 310.536.0100.  Be sure to tell our receptionist that you are “from the airport”  otherwise you will get the third degree.  

   

Regards,  

   

Moe  

         

  

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of WINGFLYER1(at)aol.com

 Sent: Tuesday, August 21, 2007 12:58 PM

 To: commander-list(at)matronics.com

 Subject: Re: prop spinner for a 680 commander  

  

     

Moe, Before you ship the spinner, I need to make sure it fits the Metzger STS conversion ( Three Bladed Prop. Is it the larger spinner(more than 14 inches and can the thicker one be polished up? Thanks Gil p.s. My address is as follows: Gil Walker 6104 Belle Rive Dr. Brentwood,  Tn 37027 Trl. 615-373-5703 Cell 615-310 5030. If you will e-mail me your number I will call you and discuss. Thanks   

  



 

         

  

Get a sneak peek of the all-new AOL.com.  

   	  Quote: 	
		    http://www.matronics.com/Navigator?Commander-List 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4

        [quote][b]

WINGFLYER1(at)aol.com
Guest

Posted: Wed Aug 22, 2007 6:48 pm Post subject: prop spinner for a 680 commander

Moe, the prop numbers are as follows; Hartzell-   HC-93Z20-2A/10151-8R

 Assymbly S/N 1124A

 Blade Clamp S/N A18122/T511      A19407T462      A19577/T427

  

 Executive Propeller in Van Nuys did the over haul on  1-4-05    Hope this helps match your spinner with my props.  Thanks Gil



Get a sneak peek of the all-new AOL.com.

avtec2(at)bellsouth.net
Guest

Posted: Thu Aug 23, 2007 3:10 am Post subject: prop spinner for a 680 commander

You will have the spinner today

 Please Make check out to

  

 Mailing Address

 Avtec II, Inc.

 P.O. Box 2563

 Titusville, FL  32781-2563

  

 Shipping Address

 [quote]      Avtec II, Inc.

   480 N Williams Ave

   Titusville, FL  32796

    

   Thanks

   Harry

   321 267-3141

---

WINGFLYER1(at)aol.com
Guest

Posted: Thu Aug 23, 2007 6:47 am Post subject: prop spinner for a 680 commander

Will send check as requested. Thanks Gil



AOL.com.

  [quote][b]

avtec2(at)bellsouth.net
Guest

Posted: Thu Aug 23, 2007 7:16 am Post subject: prop spinner for a 680 commander

Let me know when it arrives

 Harry

 [quote]   ---

WINGFLYER1(at)aol.com
Guest

Posted: Thu Aug 23, 2007 7:22 am Post subject: prop spinner for a 680 commander

Will do. Thanks Gil



Get a sneak peek of the all-new AOL.com.

  [quote][b]

Display posts from previous:

	Matronics Email Lists Forum Index -> Commander-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum