gccole13(at)btinternet.co Guest
|
Posted: Sat Sep 08, 2007 7:08 am Post subject: Locktite grades (Was Tail plane torque tube installation) |
|
|
I've found information on all the Loctite adhesives on www.bearingboys.co.uk/Buy-Loctite.
Loctite 603 is a low viscosity, fast curing, oil tolerant adhesive used for bonding rigid metal
assemblies. Ideal for gap distances up to 0.2mm (8 thou) .... it easily joins dissimilar metals
...
Loctite 243 is a removable strength, general-purpose threadlocking adhesive......
Loctite 638 is a maximum strength retaining compound. Used where high dynamic forces or cyclic
loading is expected. Locks cylindrical assemblies from 0.05mm to 0.25mm (2 to 10 thou) radial
clearance.
There is information on the site for all the other loctite adhesives but I think this is an
area where we need to stick with Europa's specifications.
Gerry Cole (europa 121)
---
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|