Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Questions

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

papadaddyo(at)tampabay.rr
Guest

Posted: Sat Sep 15, 2007 6:44 pm Post subject: Questions

I sent this yesterday but may have had the wrong to address. If it is a duplicate, I apologize.  I am just about ready to close up the top skin on the tail.  Is there anything that anyone could recommend that I add to the tail or structure prior to putting on the top.  As an example, Tim you have some good photos on your site where you added angle to support the AHRS.  What about ELT installation, etc.  I would love to see some pictures of any installations that might be beneficial to copy.  Also, where is the best place for the ELT to go?  

   

Thanks,  

   

Rick Leach  

   

       [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

LarryRosen

Joined: 16 Jan 2006
Posts: 415
Location: Medford, NJ

Posted: Sat Sep 15, 2007 7:25 pm Post subject: Questions

Seems to be 2 preferred locations for the elt.  One under the far aft 

under the vertical stab and the other is in the tail cone near the 

baggage compartment bulkhead on the right side.  Vans has a mounting 

kit, but it is easy to make your self.  The rear location puts the 

weight far aft, and has a short wire run to the antenna.



Some items to complete prior to closing up the final skin on the tail 

would be,

Any battery box modifications based on the battery you will be using.

Pitch servo installation

Wire pulls for battery, rear light and strobe, etc.

Strobe power supply mounting

AHARS (if you are mounting it in the rear and not a wing)

Static port tubing runs



Just a short list, but a start.



Larry Rosen

#356





Rick Leach wrote:

 	  Quote: 	
		  

 I sent this yesterday but may have had the wrong to address. If it is 

 a duplicate, I apologize.  I am just about ready to close up the top 

 skin on the tail.  Is there anything that anyone could recommend that 

 I add to the tail or structure prior to putting on the top.  As an 

 example, Tim you have some good photos on your site where you added 

 angle to support the AHRS.  What about ELT installation, etc.  I would 

 love to see some pictures of any installations that might be 

 beneficial to copy.  Also, where is the best place for the ELT to go?



  



 Thanks,



  



 Rick Leach



  



 *

 *

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Larry Rosen
#40356
N205EN (reserved)
<http>

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum