Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Magneto Installation

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
dpharker(at)worldnet.att.
Guest





PostPosted: Sun Sep 16, 2007 4:51 pm    Post subject: Magneto Installation Reply with quote

Am wiring up a Slick 4375 on a 7A. I am finally straightened out on the
wiring per Bob's diagram Z-13. My question is should I see infinite
resistance across the P-Lead and ground when the switch is open or am I
going to see zero ohms because of the points in the magneto? Any input
would be appreciated.

Thanks

Don Harker
N767DH
7A Finishing


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
nuckolls.bob(at)cox.net
Guest





PostPosted: Mon Sep 17, 2007 6:44 pm    Post subject: Magneto Installation Reply with quote

At 07:49 PM 9/16/2007 -0500, you wrote:

Quote:

<dpharker(at)worldnet.att.net>

Am wiring up a Slick 4375 on a 7A. I am finally straightened out on the
wiring per Bob's diagram Z-13. My question is should I see infinite
resistance across the P-Lead and ground when the switch is open or am I
going to see zero ohms because of the points in the magneto? Any input
would be appreciated.

The DC resistance looking into the p-lead of a magneto
is VERY LOW whether or not the points are open. This is
why you need the electro-mechanical or more modern electronic
"buzz" box to sense the AC resistance of the magneto.

Short answer is that for most meters, the input to the
magneto p-lead port looks like a dead short all the time.

Bob . . .

----------------------------------------
( "Problems are the price of progress. )
( Don't bring me anything but trouble. )
( Good news weakens me." )
( -Charles F. Kettering- )
----------------------------------------


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group