carlosh(at)sec-engr.com
Guest
|
 Posted: Wed Sep 19, 2007 4:01 pm Post subject: Flap actuator measurements |
 |
|
I have a question about the dimensions of the flap actuator from Vans.
The web doesn't give much info about them. I'm building a 7A but
currently have a PL-1 with manual flaps and I'd like to convert them.
What I'm looking for is the info of the actuator itself. What is the
retracted/extended length of the unit? Can you trim the length if
necessary? How heavy is it? I'm thinking of using it in the PL for
electrical flaps. I want to make sure it will fit before I actually buy
one. I will also be comparing it to those linear actuators from
cars/trucks for compatibility.
Carlos in AZ
--
Carlos Hernandez <carlosh(at)sec-engr.com>
Structural Engineers, LLC
2963 W. Elliot Rd. - Suite 3
Chandler, AZ 85224
Phone: 480.968.8600
Fax: 480.968.8608
www.sec-engr.com
CONFIDENTIALITY NOTICE
The information in this email may be confidential and/or privileged.
This email is intended to be reviewed by only the individual or
organization named above. If you are not the intended recipient or
an authorized representative of the intended recipient, you are hereby
notified that any review, dissemination or copyingof this email and
its attachments, if any, or the information contained herein is
prohibited. If you havereceived this email in error, please
immediately notify the sender by return email and delete this email
from your system.
| | - The Matronics RV-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
