Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

EFIS as only reference???EFIS as only reference???EFIS...

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
BobsV35B(at)aol.com
Guest





PostPosted: Fri Sep 21, 2007 3:45 pm    Post subject: EFIS as only reference???EFIS as only reference???EFIS... Reply with quote

Good Evening Peter,
Once upon a time in a land far, far, away, I knew a fella that fitted  a "T" fitting in the outlet of his left fuel tank on a Cessna 170. From that fitting he ran a one eighth inch hunk of brass tubing to a small needle valve mounted on the instrument panel. From that valve to the throat of the stock Marvel Schebler carburetor he ran another hunk of brass tubing. Not sure about the size of the tubing and fitting used here. That was inserted into a stock fitting that was screwed into the side of the throat of the carburetor. 

My recollection fails me here, but I believe he had bored a hole just above the throttle valve plate to accommodate the fuel fitting. Not sure though.

In any case, he could turn the fuel valve to off, turn on the needle valve, adjust the throttle plate and get a rather nice smooth running engine. He had added that extra fuel source after having had a stock gascolator get plugged with crud such that no fuel was available to the engine from either fuel cell.

Strictly illegal, but pretty neat!

Happy Skies,

Old Bob
AKA
Bob Siegfried
Ancient Aviator
Stearman N3977A
Brookeridge Air Park LL22
Downers Grove, IL 60516
630 985-8503


In a message dated 9/21/2007 6:23:14 P.M. Central Daylight Time, peterjfharris(at)bigpond.com writes:
Quote:
Ernest,
Your set up sounds good. I am interested in your manual valve back up and
would be happy for any details. I looked at the possibility of using a
carburetor as a throttle body but gave up with the aerocarb because it jams.
A suitable butterfly carb would be an option but I like your idea.
Peter




See what's new="_blank">Make AOL Your Homepage.
[quote][b]


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
echristley(at)nc.rr.com
Guest





PostPosted: Sat Sep 22, 2007 7:15 am    Post subject: EFIS as only reference???EFIS as only reference???EFIS... Reply with quote

Peter, Bob just answered for me better than I ever could have.

For me, this provides redundancy where I loose the injectors, injector
controller or the electron pump. I will be able to switch off the fuel
pump (a 6A load) to conserve battery.

BobsV35B(at)aol.com wrote:
Quote:


Good Evening Peter,

Once upon a time in a land far, far, away, I knew a fella that fitted a "T"
fitting in the outlet of his left fuel tank on a Cessna 170. From that
fitting he ran a one eighth inch hunk of brass tubing to a small needle valve
mounted on the instrument panel. From that valve to the throat of the stock
Marvel Schebler carburetor he ran another hunk of brass tubing. Not sure about the
size of the tubing and fitting used here. That was inserted into a stock
fitting that was screwed into the side of the throat of the carburetor.

My recollection fails me here, but I believe he had bored a hole just above
the throttle valve plate to accommodate the fuel fitting. Not sure though.

In any case, he could turn the fuel valve to off, turn on the needle valve,
adjust the throttle plate and get a rather nice smooth running engine. He had
added that extra fuel source after having had a stock gascolator get plugged
with crud such that no fuel was available to the engine from either fuel
cell.

Strictly illegal, but pretty neat!

Happy Skies,

Old Bob
AKA
Bob Siegfried
Ancient Aviator
Stearman N3977A
Brookeridge Air Park LL22
Downers Grove, IL 60516
630 985-8503


In a message dated 9/21/2007 6:23:14 P.M. Central Daylight Time,
peterjfharris(at)bigpond.com writes:

Ernest,
Your set up sounds good. I am interested in your manual valve back up and
would be happy for any details. I looked at the possibility of using a
carburetor as a throttle body but gave up with the aerocarb because it jams.
A suitable butterfly carb would be an option but I like your idea.
Peter



--
"Life is not a journey to the grave with the intention of arriving safely in
a pretty and well preserved body, but rather to skid in broadside,
thoroughly used up, totally worn out, with chocolate in one hand and wine in
the other, loudly proclaiming 'WOO HOO What a Ride!'"
--Unknown


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group