Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

test patch - plexiglas glued to cabin top

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
eagerlee



Joined: 28 Jan 2006
Posts: 35

PostPosted: Wed Oct 10, 2007 8:59 pm    Post subject: test patch - plexiglas glued to cabin top Reply with quote

I sent an email request to the Van's builder support asking about the use of epoxy resin to glue the windows to the cabin. Ken Scott replied that they simply do not know if it will work or not , but that they do know that Weld-On 10 does work. I built a test sample by mixing west system epoxy and adding chopped fibers to get a texture that didn't sag under its own weight. I alcohol cleaned a strip of cabin top (it was trimmed away for the door) and a surplus strip of side window Plexiglas. Both strips had been scuffed thoroughly with 120 grit aluminum oxide. I used a liberal amount of epoxy to bond the 1 inch wide strips for a 6 inch overlap. Light pressure was applied with three clothespin type clamps. The piece cured for 24 hours at 70 degrees F and today I performed a test of the sheer strength of the joint. The junction of the epoxy and the Plexiglas failed when I applied some sharp raps with a light weight ball peen hammer. I don't have subjective quantitative values for the amount of force needed to break the joint, but the pieces came apart way too easily for me. The junction of the epoxy and cabin top didn't fail under extreme chisel torture. I'll do a similar test when i get my Plexiglas glue.

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message
LloydDR(at)wernerco.com
Guest





PostPosted: Thu Oct 11, 2007 4:51 am    Post subject: test patch - plexiglas glued to cabin top Reply with quote

Did you do this same test using the Weld-on 10? I would be interested in
knowing how that one turns out.
Dan

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group