zsmith3rd(at)earthlink.ne Guest
|
Posted: Tue Nov 13, 2007 12:31 pm Post subject: another nosepiece tidbit |
|
|
do not archive
Back in '99 I acquired an Emhart air riveter. Needing to modify the nosepieces I called ZAC.
They told me the exact carbide bur they use. I ordered it from Grainger, modified the nosepieces, etc.
As offspring are prone to do, mine used the bur for some worthwhile (so he said) project and doesn't have a clue where he lost it. I do not remember the bur number....a call to Roger Dubbert at ZAC may get it.
Seems that I recall it being a "round-nose tree-shaped" bur; had a 3 or 4 digit part number. The cost was about $15.
There may be some member of the List with a CNC lathe who could demonstrate his abilities by volunteering to modify your nosepieces. A really advanced CNC setup might even inscribe your
N-number in reverse....it would show up on every rivet you install. Hi, Larry!
Regards to all,
Zed
| - The Matronics Zenith-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|