 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
drfred(at)suddenlinkmail.
Guest
|
 Posted: Fri Feb 01, 2008 8:23 pm Post subject: Foam core |
 |
|
I screwed up about 20 % of the foam core to the oil door. It broke off
when I unwrapped it and then lost the piece. Anything special about
that foam? Anything readily available to use?
Thanks in advance.
Dr Fred.
40515
cowling actually fit tonight with skybolt /camlocks.
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
VHMUM(at)bigpond.com
Guest
|
| Posted: Fri Feb 01, 2008 8:36 pm Post subject: Foam core |
|
|
I believe that foam core is just a like a flller or should I say something
to make that door thicker so you do not have to fill with bog etc, so what
about balsa wood or somthing light like that?? My thinking is you need
something for the glass to bight to. I might be of the track here I hope you
get what I mean
regards chris 388
---
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
millstees(at)ameritech.ne
Guest
|
| Posted: Fri Feb 01, 2008 8:51 pm Post subject: Foam core |
|
|
Fred:
Simply lay in some foam with flox, sand to shape, and then apply a couple
layers of fiberglass, then peel-ply, and you back to where you were.
Good luck,
Steve Mills N750SM (reserved)
RV-10 40486 Slow-build Eggenfellner E-6TI
Naperville, Illinois
Finishing kit, engine install
Do Not Archive
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
AV8ORJWC
Joined: 13 Jul 2006
Posts: 1149
Location: Aurora, Oregon "Home of VANS"
|
| Posted: Fri Feb 01, 2008 8:53 pm Post subject: Foam core |
|
|
Fred, measure the thickness and I will check our composite shop for some
scrap I can send. Most of it is 0.25, 0.375, 0.50, 0.75 and 1.00".
I am thinking it is 0.125 or thinner. I can contact M&T on Monday for
you.
John
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
drfred(at)suddenlinkmail.
Guest
|
| Posted: Sat Feb 02, 2008 11:35 am Post subject: Foam core |
|
|
John and friends:
Thanks. I just wanted to make sure there was nothing special with the
core. I figured it was just to make the part lighter. Will Fill in
with balsa or other filler to make up the part I'm missing. John, you
don't need to send anything. Thanks for the reply.
Fred.
John W. Cox wrote:
[quote]
Fred, measure the thickness and I will check our composite shop for some
scrap I can send. Most of it is 0.25, 0.375, 0.50, 0.75 and 1.00".
I am thinking it is 0.125 or thinner. I can contact M&T on Monday for
you.
John
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
