Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Drawings or pictures of Outrigger Assembly

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
jeffrey-j-paris(at)excite
Guest





PostPosted: Thu Feb 07, 2008 3:20 pm    Post subject: Drawings or pictures of Outrigger Assembly Reply with quote

Dear Europa List,

I'm the owner of a Europa Classic Monowheel kit serial number A012. With that in mind I am looking for either an exploded view, photographs or a better assembly drawing of the outrigger/flap mechanism. I just seem to be at a loss with the section views that my manual shows.

You know what they say "a picture is worth a thousand words," and with that I will close this thread.

Thank you for your time and consideration.

Regards,

Jeff Paruis
Kit# A012 Monowheel Classic
280 hours into the build and working on mounting the flaps to my wings.

_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
jeffrey-j-paris(at)excite
Guest





PostPosted: Fri Feb 08, 2008 5:45 pm    Post subject: Drawings or pictures of Outrigger Assembly Reply with quote

Hello Europa List,

Well I found exploded views on the Europa website. My instructions don't have the documentation. With this in mind we assembled the outrigger for one wing and come to find out we have two different pairs of OR4, one set is very chunky looking and the other set looks quite refined and might be a later revision? The funny thing is the exploded view show the "clunkier" part and we used it and low and behold the outrigger will not full extend, it seem as if the OR4 we used is bumping into the bottom wing skin.

I just don't know at this point, because I am running into some "extra" parts that are probably upgrades. I guess that is what you get when you take over a kit that is quite a few years older and has been picked over by the former builder; No big deal it will all work out in the end.

Any ideas?

Jeff Paris #A012 Europa Mono Classic

--- On Thu 02/07, Jeffrey J Paris < jeffrey-j-paris(at)excite.com > wrote:
From: Jeffrey J Paris [mailto: jeffrey-j-paris(at)excite.com]
To: europa-list(at)matronics.com
Date: Thu, 7 Feb 2008 18:17:01 -0500 (EST)
Subject: Drawings or pictures of Outrigger Assembly



_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group