Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Scratch building 701 spars and spar root rivets

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith-List
View previous topic :: View next topic  
Author Message
brothapig(at)HOTMAIL.COM
Guest





PostPosted: Sat Feb 09, 2008 1:54 pm    Post subject: Scratch building 701 spars and spar root rivets Reply with quote

To those of you who are scratch building their 701 spars, I've got a question concerning the spar root doubler rivets (I believe the p/n is 7V3-2SP). The drawings show that there are rivets in the middle of the doubler (I'm assuming to help hold the doubler to the web), but I cannot find any measurements to locate these holes! I've got measurements for the holes along each edge of the doubler; just not in the middle. What did everyone else do? [quote][b]

- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List
Back to top
dougsnash(at)yahoo.com
Guest





PostPosted: Sat Feb 09, 2008 8:09 pm    Post subject: Scratch building 701 spars and spar root rivets Reply with quote

Ryan, seems to me when I did mine a few months ago, I
just spaced them out evenly so that the location
matched the jist of the drawings. I think the number
of rivets is more important than their exact location

Doug MacDonald
CH-701 Scratch Builder
NW Ontario, Canada

--- Ryan Vechinski <brothapig(at)hotmail.com> wrote:

Quote:
To those of you who are scratch building their 701
spars, I've got a question concerning the spar root
doubler rivets (I believe the p/n is 7V3-2SP). The
drawings show that there are rivets in the middle of
the doubler (I'm assuming to help hold the doubler
to the web), but I cannot find any measurements to
locate these holes! I've got measurements for the
holes along each edge of the doubler; just not in
the middle. What did everyone else do?

Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs


- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group