hooverra(at)verizon.net Guest
|
Posted: Thu Mar 06, 2008 6:24 pm Post subject: "Poor Man's" coax termination with RG-400(coax stripper) |
|
|
Ralph,
A single edge razor blade or small knife used with care works fine.
Score the jacket and pull it off with a small diagonal cutter. Do the
same for the center conductor. Any nicks to the conductors start over!!
You can master this in several practice attempts and when done properly
there is no difference in results. Any time you may save with the
expensive tool you will probably loose looking for the too The
diagonal cutter can be used to trim the braid. I have used the expensive
tools, a razor blade and a swiss army knife over the course of years and
many hundreds of connectors, The knife is always in my pocket and the
final result is the same.
Whatever tool you use slide the ferrule on first and then prep the cable.
Here is another option but your wallet will be $50 lighter.
http://www.specialized.net/ecommerce/shop/layout.asp?product%5Fid=108X956
--
Ralph C. Hoover
RV7A
hooverra at verizon dot net
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|