Matronics Email Lists :: View topic - 115mm flanging die needed

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

115mm flanging die needed

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

Terry Phillips

Joined: 11 Jan 2006
Posts: 346
Location: Corvallis, MT

Posted: Wed Mar 19, 2008 11:35 am Post subject: 115mm flanging die needed

Hi Randy

 I am done using your flanging dies. They are beautifully made, and worked great. I also used your auto-press idea. It was quick and easy. Thanks for the idea. You can check the 3/18 entry in my builder's log to see the auto-press in action.

 I can hold the dies and ship whenever another builder needs them or I can ship them back to you. Let me know your preference.

 Thanks so much for letting me use them.

 Terry

 At 10:43 AM 2/3/2008 -0800, you wrote:

  	  Quote: 	
		  Hi Randy,

 I haven't seen or heard much from you recently on the Zenith list.  I hope you are doing well.

 Unless I mess up a part (which could always happen!), I think I'm done using your flanging dies.  They have been a great help, and worked so well.  Thanks for the extended use.

 I'll be glad to ship them back to you, or I can also hold on to them until another builder contacts you for their use.  Then I could ship them direct, saving you the postage.  It is your call.

 Just let me know.  

 Thank you, again.

 Larry Winger

 On Jul 26, 2007 11:24 AM, Randy L. Thwing <n4546v(at)mindspring.com (n4546v(at)mindspring.com)> wrote:

   Hey Larry:

  If  you don't get a better offer, my "iron" dies are available.  They are

  currently in the "custody" of  Builder John Bolding in Texas who is finished

  with them and awaiting shipping instructions.  It is the three die set that

  needs to stay together, but it is my understanding that the three dies will

  fit in a postal flat rate box and ship for under ten bucks.

  Let me know if you want them.

  Best Regards,

  Randy L. Thwing, Las Vegas  do not archive

  Subject: 115mm flanging die needed

  > --> Zenith-List message posted by: "lwinger" <larrywinger(at)gmail.com (larrywinger(at)gmail.com)>

  >

  > Thanks to a good building buddy, I already have two sets of flanging dies

  (65mm and 95mm).  I'm missing the larger 115mm dies for my wing ribs.

  >

  > Is there anyone on the list with a 115mm set that I could use for a few

  weeks?  I'll be glad to pay shipping both ways.  Thanks.

  >

  > Feel free to contact me off list.

  >

  > Do not archive.

  >

  > --------

  > Larry Winger

  > Tustin, CA

  > 601XL/Corvair from scratch

  > Control surfaces and wing spars complete

  > Making wing ribs 	

 Terry Phillips

 ttp44~at~rkymtn.net

 Corvallis MT

 601XL/Jab 3300 s .. l .. o .. o .. w build kit - Tail, flaps, & ailerons are done; working on the wings

 http://www.mykitlog.com/N47TP/     [quote][b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

_________________
Terry Phillips
Corvallis, MT
ttp44<at>rkymtn.net
Zenith 601XL/Jab 3300 slow build kit - Tail feathers done; working on the wings.

n4546v(at)mindspring.com
Guest

Posted: Wed Mar 19, 2008 12:11 pm Post subject: 115mm flanging die needed

Hey Terry:

  

 I'm glad they worked out for you.  My  "gravity" powered lightning hole press is always good for a lot of "yuks" on the  forum, but it does work!  

  

 For right now, please hang onto the dies, I'll try  to determine what the next move will be.

  

 I'd like to check your builder's log, how about a  link steering me there?

  

 Regards,

  

 Randy

 [quote]   ---

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum