Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

technical MayDay

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

Fergus Kyle

Joined: 03 Jun 2007
Posts: 291
Location: Burlington ON Canada

Posted: Thu Mar 27, 2008 1:07 pm Post subject: technical MayDay

Hello,

	I'm at the wiring stage and have a fascinating white cable with 5

marvellous tiny wires emanating therefrom.  There's a pair of whites, a

white/green, white/red and white/blue. I just know it's the cable from the

pitch trim motor, 'way back there in the tail.

	The trouble is I've lost the circuit diagram - or let's say it's in

safe-keeping. I could stumble around and screw up the carefully-organized

central position in trying to divine the proper wiring, or I could make a

clumsy appeal for a copy from another builder.

	I have chosen the latter...................please. Just so I don't

get all 900 of them kindly advise here first and will confirm the need.

There's the promise of a pint of the best for the treasured winner - the

promise.

Regards, Ferg

VE3LVO(at)rac.ca

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

josok-e(at)ukolo.fi
Guest

Posted: Thu Mar 27, 2008 1:31 pm Post subject: technical MayDay

I will take the pint. It's so simple, you don't need a diagram. Connect the white wires to the white wires of the trim switch. Connect the other wires to the same colors on the trim indicator. That leaves you with some black and red wires on the trim switch and on the indicator. Connect the red ones to your 1 A fuse or breaker, and the black ones to ground. 



Regards,



Jos Okhuijsen

Visit -  www.EuropaOwners.org

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Fergus Kyle

Joined: 03 Jun 2007
Posts: 291
Location: Burlington ON Canada

Posted: Thu Mar 27, 2008 1:46 pm Post subject: Technical MayDay

Jos Okhuijsen came through in no time at all with the answer to my

quest. Please disregard the topic.

Thanks, Jos

Ferg

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

rparigor(at)suffolk.lib.n
Guest

Posted: Thu Mar 27, 2008 1:49 pm Post subject: technical MayDay

Hi Ferg



"or I could make a clumsy appeal for a copy from another builder"



Try from the horses mouth:



http://www.rayallencompany.com/RACinfo/downloadpg.html



Ron Parigoris

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

rehn(at)rockisland.com
Guest

Posted: Thu Mar 27, 2008 1:54 pm Post subject: technical MayDay

Ferg



It's been a while so I pulled out the diagram and it shows the orange

(red?), green and blue going to the position trim indicator and the two

whites to the trim switch. You can hook it up and use a 9 volt battery to

see if all is working. Then change wires to get things moving the directions

you want if need be. If you have a basic Rotax electrical wiring diagram it

is often illustrated there and you can see where to make the power

connections as well. Good luck.



Jerry

--

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Gilles.Thesee(at)ac-greno
Guest

Posted: Thu Mar 27, 2008 4:41 pm Post subject: technical MayDay

Fergus Kyle a écrit :

 	  Quote: 	
		   



 Hello,

 	I'm at the wiring stage and have a fascinating white cable with 5

 marvellous tiny wires emanating therefrom.  There's a pair of whites, a

 white/green, white/red and white/blue. I just know it's the cable from the

 pitch trim motor, 'way back there in the tail.

 	The trouble is I've lost the circuit diagram - or let's say it's in

 safe-keeping. I could stumble around and screw up the carefully-organized

 central position in trying to divine the proper wiring, or I could make a

 clumsy appeal for a copy from another builder.

Fergus,
	




Would this qualify for the pin ?



http://www.rayallencompany.com/RACmedia/instructionsT2andT3.pdf



Best regards,

-- 

Gilles

http://contrails.free.fr

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum