 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
dlm46007(at)cox.net
Guest
|
 Posted: Wed Mar 26, 2008 5:44 pm Post subject: fiberglass primer |
 |
|
To protect the fiberglass parts (canopy, cowl and tail fairing) during the fly off, what paint has been used? [quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
Deems Davis
Joined: 09 Jan 2006
Posts: 925
|
| Posted: Wed Mar 26, 2008 6:06 pm Post subject: fiberglass primer |
|
|
I've noticed that some folks haven't used anything. If you do decide to
do something you should check with your painter to make sure you're not
going to make life harder for them (and more expensive for
you).Polyfiber UV SmoothPrime is what a lot of folks use for pin-hole
and weave filling. it's also a UV barrier, and is compatible with almost
all paint systems. If you go this route, call me, and I'll give you a
name of someone who carries it in PHX. (It's NOT cheap)
Deems
David McNeill wrote:
| Quote: |
To protect the fiberglass parts (canopy, cowl and tail fairing) during
the fly off, what paint has been used?
*
*
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
rene(at)felker.com
Guest
|
|
| Back to top |
|
|
AirMike
Joined: 27 Feb 2007
Posts: 514
Location: Nevada
|
| Posted: Wed Mar 26, 2008 8:20 pm Post subject: Fiberglass primer |
|
|
i will probably wind up buying this stuff from Spruce, but has anyone found a Urethane topcoat-compatible primer that is cheaper.
Also, do I need more than one quart to do the RV10 top?
Thanks for your answers in advance
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
See you OSH '18
Q/B - sold. |
|
| Back to top |
|
|
roadmaps
Joined: 08 Nov 2007
Posts: 49
|
| Posted: Thu Mar 27, 2008 4:27 am Post subject: fiberglass primer |
|
|
Mike,
I would not apply a primer until you know the paint system that your painter
will use. The primer should be part of the same system. The UV Smoothprime
is good under any paint system.
John Testement
jwt(at)roadmapscoaching.com
40321
Richmond, VA
Painting
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
