Matronics Email Lists :: View topic - MId Seat Rail Supports

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

MId Seat Rail Supports - Where do they go

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

Dsyvert(at)AOL.COM
Guest

Posted: Sun Mar 30, 2008 6:42 am Post subject: MId Seat Rail Supports - Where do they go

To All:

  

     ON page 28-16 it shows building the Mid Seat Rail  Supports - F-1057, then it says putting them off to the side until after the  gear legs are installed. Can some one tell me on what page they are installed? I  can not seem to find it.

  

 Thanks

 Dave Syvertson

 40625



Create a Home Theater Like the Pros. Watch the video on AOL Home.

  [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

rene(at)felker.com
Guest

Posted: Sun Mar 30, 2008 7:25 am Post subject: MId Seat Rail Supports - Where do they go

I don’t ever remember finding it.  But when you go to put the seats in….you will need them installed.  I did not put them in until final assembly.  

     

Rene' Felker  

RV-10 N423CF Flying  

801-721-6080  

        

  

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Dsyvert(at)AOL.COM

 Sent: Sunday, March 30, 2008 8:37 AM

 To: rv10-list(at)matronics.com

 Subject: MId Seat Rail Supports - Where do they go  

  

     

To All:  

    

   

    

    ON page 28-16 it shows building the Mid Seat Rail Supports - F-1057, then it says putting them off to the side until after the gear legs are installed. Can some one tell me on what page they are installed? I can not seem to find it.  

    

   

    

Thanks  

    

Dave Syvertson  

    

40625  

  



 

         

  

Create a Home Theater Like the Pros. Watch the video on AOL Home.  

  

     [quote]



href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List

href="http://forums.matronics.com">http://forums.matronics.com

href="http://www.matronics.com/contribution">http://www.matronics.com/c

[b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

DLIUDVINAITIS(at)aol.com
Guest

Posted: Sun Mar 30, 2008 7:54 am Post subject: MId Seat Rail Supports - Where do they go

DAVE

  AS RENE STATED THEY ARE INSTALLED AT FINAL., DIRECTIONS STATE LATER  ON TO FINAL DRILL LANDING GEAR BOLTS FIRST THEN INSTALL MID SUPPORTS ON TOP OF  LANNING GEAR SUPPORTS.

 MY QUESTION TO ALL IS WHAT HARDWARE BOLTS/NUTS DO YOU USE TO ATTACH MID  SUPPORTS TO THEIR FINAL POSITION?

  

  

  

 DAVE LIUDVINAITIS, NJ

 #40466 

  

  



Create a Home Theater Like the Pros. Watch the video on AOL Home.

  [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

jesse(at)saintaviation.co
Guest

Posted: Sun Mar 30, 2008 11:37 am Post subject: MId Seat Rail Supports - Where do they go

As was mentioned, I would wait until EVERYTHING is done with all wiring for your stick grips at least before putting them on.  You can put them on before your inspection because there is an inspection panel there, but I would leave it off until the very end.

 Jesse Saint

Saint Aviation, Inc.

jesse(at)saintaviation.com (jesse(at)saintaviation.com)

Cell: 352-427-0285

Fax: 815-377-3694



 



On Mar 30, 2008, at 9:36 AM, Dsyvert(at)aol.com (Dsyvert(at)aol.com) wrote: 	  Quote: 	
		    To All:

  

     ON page 28-16 it shows building the Mid Seat Rail Supports - F-1057, then it says putting them off to the side until after the gear legs are installed. Can some one tell me on what page they are installed? I can not seem to find it.

  

 Thanks

 Dave Syvertson

 40625



Create a Home Theater Like the Pros. Watch the video on AOL Home.

  	  Quote: 	
		  

href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List

href="http://forums.matronics.com">http://forums.matronics.com

href="http://www.matronics.com/contribution">http://www.matronics.com/contribution



	


	


 [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum