Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Dynon , sl40, pm1000II, and GTX327 Pinout numbers

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
gcarnforth



Joined: 27 Nov 2006
Posts: 3

PostPosted: Fri May 16, 2008 9:54 am    Post subject: Dynon , sl40, pm1000II, and GTX327 Pinout numbers Reply with quote

Hello!

I have been motoring along on my RV7 and have always been able to find answers in the archives.

I am having troubles firing up my panel and am in the process of going back through the harness.

Does anyone have the pin numbers for connecting these units?

Flightdek to GTX327
SL40 to PM1000II

I have the diagrams but anyone with the pin numbers would help verify what I have done right/wrong

Thanks
G carnforth RV7 louisville KY


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
G. Carnforth
Louisville, KY
RV7
Back to top
View user's profile Send private message Send e-mail
longg(at)pjm.com
Guest





PostPosted: Fri May 16, 2008 11:36 am    Post subject: Dynon , sl40, pm1000II, and GTX327 Pinout numbers Reply with quote

G.
Not to confuse you, but I have them for the Dynon, sl30 and GTX330. Not
exact, but close family.
If you get stuck, they may help. They are hard copy so I'll need to scan
them in (Monday).

I'll bet the sl40 is the same as the sl30 w/o the nav junk. Don't know
about the 330 since it has different options than the 327.
Thanks

--


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
rshannon



Joined: 05 Sep 2007
Posts: 62

PostPosted: Fri May 16, 2008 6:04 pm    Post subject: Dynon , sl40, pm1000II, and GTX327 Pinout numbers Reply with quote

On Fri, May 16, 2008 at 10:54 AM, gcarnforth <greg(at)chesterpools.com (greg(at)chesterpools.com)> wrote:
Quote:
--> AeroElectric-List message posted by: "gcarnforth" <greg(at)chesterpools.com (greg(at)chesterpools.com)>
..
Does anyone have the pin numbers for connecting these units?

Flightdek to GTX327
SL40 to PM1000II

SL-40 pin outs are:


1 DC power
2 (reserved)
3 RS232 serial data out (TxD)
4 TxKey,pulled low to transmit
5 (no contact -- do not connect)
6 speaker
7 mic ground
8 Mic 1 input
9 DC power ground
10 RS232 serial data in (RxD)
11 RS232 signal ground
12 Intercom select, pulled low to turn on intercom
13 Audio ground (speaker & headphone)
14 Headphone terminal out
15 Mic 1 input

[quote][b]


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message AIM Address Yahoo Messenger
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group