 |
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
ctsmallwood(at)waitrose.c Guest
|
Posted: Tue May 13, 2008 11:56 pm Post subject: Dynon D10 Remote compass Position |
|
|
Hi All
Help please!
Finally calibrating the DI on my D10.To save laptops
in flight the remote compass is to be installed
Any one fitted the remote compass and if so where
was the optimum position? Thanks in anticipation
Regards
Colin Smallwood G-DEBR
[quote][b]
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
 |
josok-e(at)ukolo.fi Guest
|
Posted: Wed May 14, 2008 1:07 am Post subject: Dynon D10 Remote compass Position |
|
|
I stuck mine in the ceiling. There are no current carrying wires or hardware in the vicinity. Afterward i found out, that the headphones can come too close. Sop if you put it there, put it as far back as possible, so that your headphone will always be at at least a foot away,
Regards,
Jos Okhuijsen
Visit - www.EuropaOwners.org
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
 |
raimo.toivio(at)rwm.fi Guest
|
Posted: Wed May 14, 2008 1:22 am Post subject: Dynon D10 Remote compass Position |
|
|
Colin,
I am not sure if it was The Optimum Pos,
but anyway I installed it (Dynon remote compass)
behind the D-panel under the stabilator tube (middle).
Under the remote compass I made a special aluminium bracket
which was both ways *absolutely* levelled when the plane was supported to the flevel flight position.
I glued it to the floor by Sica mass.
The remote compass is fixed to the bracket w Nylon screws and nuts
- so no any magnetic metal near by. Nylon screws are positioned such a way that it is possible to make some minor adjustments to reposition the remote compass.
Seems to work well. If necessary I can take a pic and send it to you.
BTW my Dynon´s OAT sensor is located far behind the remote compass.
Raimo
[quote] ---
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
 |
Trevpond(at)aol.com Guest
|
Posted: Wed May 14, 2008 1:54 am Post subject: Dynon D10 Remote compass Position |
|
|
Hi Colin,
Mine is in the roof between the doors, obviously facing fore and aft and works perfectly.
regards
Trev Pond
G-LINN
[quote][b]
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
 |
ctsmallwood(at)waitrose.c Guest
|
Posted: Wed May 14, 2008 2:20 am Post subject: Dynon D10 Remote compass Position |
|
|
Jos
Thanks for the info
Colin
do not archive
---
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|