Matronics Email Lists :: View topic - Aerotronics RV-10 Panel

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Aerotronics RV-10 Panel

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

Mike Whisky

Joined: 05 Jun 2006
Posts: 336
Location: Switzerland

Posted: Mon May 19, 2008 11:08 pm Post subject: Aerotronics RV-10 Panel

Is someone on the list who installed the Aerotronics RV-10 panel?



http://www.aerotronics.com/experimental/vans_category.php#rv10



What are your experience, how much additional "fitting" work is required?



Best Regards

Michael

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
RV-10 builder (flying)
#511

henkjan(at)zme.nl
Guest

Posted: Mon May 19, 2008 11:54 pm Post subject: Aerotronics RV-10 Panel

Look at www.zme.nl and click the kitlog logo, and it will fit your

center console as well!

Additional fitting work?......a lot!



Best regards

Henkjan



-----Oorspronkelijk bericht-----

Van: owner-rv10-list-server(at)matronics.com

[mailto:owner-rv10-list-server(at)matronics.com] Namens Michael Wellenzohn

Verzonden: dinsdag 20 mei 2008 9:09

Aan: rv10-list(at)matronics.com

Onderwerp: Aerotronics RV-10 Panel


<rv-10(at)wellenzohn.net>



Is someone on the list who installed the Aerotronics RV-10 panel?



http://www.aerotronics.com/experimental/vans_category.php#rv10



What are your experience, how much additional "fitting" work is

required?



Best Regards

Michael



--------

RV-10 builder (engine, prop, finishing)

#511





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=183983#183983

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Tue May 20, 2008 12:26 am Post subject: Aerotronics RV-10 Panel

Michael, I saw Henkjan's pics and 'fell in love' with the panel, 

e-mailed him to find out where he got it and then contacted Aerotronics 

who warned me that it would require additional fitting. They and Henkjan 

are right!  I'm not sure I went about it the best way, but the 1st 3-4 

links on this page show how I mounted the panel to the fuse/upper fwd 

fuse. http://deemsrv10.com/upperfwdfuseinstallationlogindex.html There 

are several other pages that show the installation. as well. I am VERY 

happy with the end result so far, it is aesthetically pleasing to me, 

however it took a lot of additional work. (I still have to reset the 

copilot subpanel as it is slightly crooked) 

http://deemsrv10.com/album/Panel/slides/DSC05574.html. One thing to be 

aware of is that the design of this panel restricts the use of the 

available 'real estate' so if you have a lot of components that you want 

to put in the panel, make sure they will all fit. I also made a center 

console to match to it as well. 

http://deemsrv10.com/album/Sec%2041%20Upper%20Fwd%20Fuse%20Install/slides/DSC03024.html



Deems Davis # 406

'Its all done....Its just not put together'

http://deemsrv10.com/



Henkjan van der Zouw wrote:

 	  Quote: 	
		   



 Look at www.zme.nl and click the kitlog logo, and it will fit your

 center console as well!

 Additional fitting work?......a lot!



 Best regards

 Henkjan

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

AirMike

Joined: 27 Feb 2007
Posts: 514
Location: Nevada

Posted: Tue May 20, 2008 6:04 pm Post subject: Aerotronics RV-10 Panel

They did my panel for me - awesome.  See my post previously put on this site under "Aerotronics - Blatant plug for - Plug & Play panel".



They are very complete. You do need to do a lot of finish wiring, but I went to Billings (They are also at OSH) to pick it up. They gave me three hours of training in finish wiring. Basically they give you a bunch of connectors to just conjoin with their connectors already on the panel.  Very simple and the directions are excellent (diagrams). 



I figure that they saved me about 400 hours of build time and infinite aggravation. Plus it looks really professional. Their pricing is not cheap, but for what you get it is a bargain. If you need support or have questions, it is included - no extra charge for the 1st year.

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

A-Panel.JPG

Description:

Filesize:

1.49 MB

Viewed:

379 Time(s)

_________________
See you OSH '18
Q/B - sold.

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum