Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Help! Mod 52 or 74

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

carl(at)flyers.freeserve.
Guest

Posted: Sat May 24, 2008 10:29 am Post subject: Help! Mod 52 or 74

Does anybody have a kit for either Mod 52 or Mod 74 (with the tie bar 

assembly) that hasnt been fitted yet



I need the dimension of the W34 mushroom end which fits inside the steel 

tube tie bar. To be precise I need to know exactly how long the shaft is 

that protrudes from the rear of the mushroom flange - preferably in mm but 

inches would be OK.



The reason is that I may have drilled the inboard holes through the tie bar 

in the wrong place - dont ask how this came about , its a long story. I 

believe the dimension should be 2" or 51mm but im hoping it is nearer 55mm. 

As mine is now glued in place I cant check my own dimensions without ripping 

everything apart (which I may have to do anyway if it is seriously out).



Carl Pattinson

G-LABS

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

craigb(at)onthenet.com.au
Guest

Posted: Sat May 24, 2008 1:33 pm Post subject: Help! Mod 52 or 74

My W34 reads as 53.85mm from the end of the tube to inside of flange (the

outside being the face that goes

against the side of the fuse)



--

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

fklein(at)orcasonline.com
Guest

Posted: Sat May 24, 2008 3:27 pm Post subject: Help! Mod 52 or 74

 	  Quote: 	
		   

 <craigb(at)onthenet.com.au>



 My W34 reads as 53.85mm from the end of the tube to inside of flange 

 (the

 outside being the face that goes against the side of the fuse)


	


craig...if I understand you correctly, you have either a very short 

tube or a bad case of fuselage obesity for which there is no known 

cure...Fred

-- 

This message has been scanned for viruses and

dangerous content by MailScanner, and is

believed to be clean.

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

craigb(at)onthenet.com.au
Guest

Posted: Sat May 24, 2008 4:02 pm Post subject: Help! Mod 52 or 74

Yeah i put a car jack in there to give me the wide body mod the fast way

 : )

only joking



do not archive



--

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

vgunn(at)platinum.ca
Guest

Posted: Thu May 29, 2008 9:02 pm Post subject: Help! Mod 52 or 74

why did you BAN me?

i dont talk much but WHy?

skyward

---

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

craigb(at)onthenet.com.au
Guest

Posted: Fri May 30, 2008 3:06 am Post subject: Help! Mod 52 or 74

Umm Not me mate



craig



do not archive



--

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum