nuckolls.bob(at)cox.net Guest
|
Posted: Sun Jun 22, 2008 5:05 am Post subject: Inverting the sense for warning tone controls |
|
|
A number of builders who are incorporating DIY warning
tone generators in their projects are finding situations
where closing a contact to ground is the best way to
enable a particular tone. The drawings in Chapter 18
only accommodate a open-ground-for-tone function.
I've published a simple modification to the schematic
that will provide the close-ground-for-tone operation.
This same mod can be applied to any of the three
generators.
http://aeroelectric.com/Pictures/Schematics/Control_Sense_Inversion.pdf
Bob . . .
----------------------------------------)
( . . . a long habit of not thinking )
( a thing wrong, gives it a superficial )
( appearance of being right . . . )
( )
( -Thomas Paine 1776- )
----------------------------------------
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|