Fergus Kyle
Joined: 03 Jun 2007 Posts: 291 Location: Burlington ON Canada
|
Posted: Sun Jun 22, 2008 5:35 am Post subject: Roger Revenson - radios |
|
|
Roger,
If it's any help, I worked the city here as Antenna system
troubleshooter for amateur radio for about 20 years. In almost every
problem, the solution turned out to be connectors, and BNC modes in
particular, although others were there.
The usual cause was homemade connections, not following EXACTLY the
instructions or not having the correct tools - (Soldering equipment), such
as dripped solder, tiny wires running loose, etc. 9 times of 10, I went to
the antenna cable connector and found the fault.
For efficiency, I would concentrate on the connector(s) first. I
don't want to appear pushy but might suggest getting an old hand from the
local radio club interested. They often are intrigued by radio trouble and a
second discipline in the think tank is useful.
Good luck,
Ferg
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|