robin1(at)mrmoisture.com Guest
|
Posted: Mon Sep 01, 2008 1:24 pm Post subject: Airbox for BPE Cold Induction & SJ Cowl |
|
|
RV-10 List,
I finally got around to posting photos of our Air Box solution to mate the BPE Forward Facing Cold Induction unit to the Sam James Cowl. Please note that we have yet to lay up some fiberglass inside the air box to eliminate the deep corners and smoothly guide the air into the injector body.
I will post additional photos once we get the alternate air flap fitted onto the top of the air box.
Part of the beauty of this design is the lower cowl and filter should simply drop away from the injector body and upper air box when the lower cowl is removed.
http://www.painttheweb.com/rv-10/Sj_Air_Box.htm
Robin
RV-4 Sold
RV-6A 440 Hours
RV-10 Ready, Set… Oh one more thing…
RV-8A Next…
Updated photos of the SJ Plenum: http://www.painttheweb.com/rv-10/SJ%20Plenum.htm
Updated photos of the SJ Cowl: http://www.painttheweb.com/rv-10/SjCowl.htm
[quote][b]
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|