Matronics Email Lists :: View topic - Finally got the EIS problem solved

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Finally got the EIS problem solved

Matronics Email Lists Forum Index -> JabiruEngine-List

View previous topic :: View next topic

Author Message

Lynn Matteson

Joined: 10 Jan 2006
Posts: 2778
Location: Grass Lake, Michigan

Posted: Fri Oct 31, 2008 12:43 pm Post subject: Finally got the EIS problem solved

I finally got the EIS 4000 to report accurate data, without hopping  

all over the screen, I installed a Radio Shack 273-105 ferrite filter  

(as suggested by Sandy at Grand Rapids Tech) around the input wire  

bundle, and that seems to have cured it. After installing the filter,  

the thing acted up once during taxi, but never after that....in .4  

hrs of flying. I have another filter to  install on the EGT and CHT  

probe extensions, but I may not need to do that....we'll see.

Lynn Matteson

Kitfox IV Speedster

Jabiru 2200, 583hrs

Sensenich 62x46

flying again (21 hrs) after rebuild, and new Electroair direct-fire  

ignition system

- The Matronics JabiruEngine-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?JabiruEngine-List

_________________
Lynn
Kitfox IV-Jabiru 2200
N369LM

Display posts from previous:

	Matronics Email Lists Forum Index -> JabiruEngine-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum