 |
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
gilbey69(at)bellsouth.net Guest
|
Posted: Fri Nov 07, 2008 11:28 am Post subject: manifold pressure sender |
|
|
guys,having trouble with the manifold pressure sending unit that come with
the manifold gauge that vans sends with his unit.i have replaced three
senders in 135 hours,the last one just went out again 10 miles out a few
minutes ago,any one have any ideas as to what is causing this problem,or
where to get them with out having to buy the whole set up from vans,i know
vans sez to replace both, i have done, but also looking at the back of the
units,the dates made are differant, so that tells me that they are not a
matched pair,as far as viberation,the last time one went out,i mounted the
unit on plastic ties, hanging from the bulkhead, take that away from it to
see if thats the problem,i dont think thats it,any ideas from anyone on
this,thanks
frank goggio rv6a
wilmington nc
do not archive
| - The Matronics RV-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV-List |
|
|
|
Back to top |
|
 |
n320wt(at)yahoo.com Guest
|
Posted: Fri Nov 07, 2008 1:03 pm Post subject: manifold pressure sender |
|
|
Do you have a restrictor type fitting in the engine? I had a problem where the vacuum on the line at shut down would suck small amounts of fuel Into the line, evaporate and leave fuel dye to foul things up!!!
Sent from my iPhone
Brian Alley
On Nov 7, 2008, at 2:27 PM, "gilbey69" <gilbey69(at)bellsouth.net> wrote:
guys,having trouble with the manifold pressure sending unit that come with the manifold gauge that vans sends with his unit.i have replaced three senders in 135 hours,the last one just went out again 10 miles out a few minutes ago,any one have any ideas as to what is causing this problem,or where to get them with out having to buy the whole set up from vans,i know vans sez to replace both, i have done, but also looking at the back of the units,the dates made are differant, so that tells me that they are not a matched pair,as far as viberation,the last time one went out,i mounted the unit on plastic ties, hanging from the bulkhead, take that away from it to see if thats the problem,i dont think thats it,any ideas from anyone on this,thanks
frank goggio rv6a
wilmington nc
do not archive
| - The Matronics RV-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV-List |
|
|
|
Back to top |
|
 |
gilbey69(at)bellsouth.net Guest
|
Posted: Fri Nov 07, 2008 1:36 pm Post subject: manifold pressure sender |
|
|
brian,yes on the restrictor fitting on the engine, i have checked the line
running to the bulkhead, to the sending unit, all clear,
thanks, frank goggio
| - The Matronics RV-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV-List |
|
|
|
Back to top |
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|