Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Acrylic Drill Bits

Matronics Email Lists Forum Index -> Kitfox-List

View previous topic :: View next topic

Author Message

gary.algate(at)sandvik.co
Guest

Posted: Tue Dec 09, 2008 9:47 pm Post subject: Acrylic Drill Bits

Are there any list members in Australia who know where I could purchased drill bits for drilling acrylic. 

 

I have decided to bite the bullet and fit my LP Aero windscreen but can't find the bits  that I ordered for the job and nobody here in Adelaide seems to know of the special bit angle required. 

 

Regards 

 

Gary

 

 Gary Algate

 Classic 4 Jab 2200 

 Office Phone: +61 8 8276 7655

 

 

 This e-mail is confidential and it is intended only for the addressees. Any review, dissemination, distribution, or copying of this message by persons or entities other than the intended recipient is prohibited. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message from your system. The sender does not accept liability for any errors or omissions in the contents of this message which may arise as a result of the e-mail transmission.

 “This year, instead of sending you a Christmas card in the mail, we have made a contribution to [url=Arial]UNICEF Australia[/url]. We wish you a safe and happy Christmas". [quote][b]

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

Lynn Matteson

Joined: 10 Jan 2006
Posts: 2778
Location: Grass Lake, Michigan

Posted: Wed Dec 10, 2008 10:55 am Post subject: Acrylic Drill Bits

I just checked mine, Gary, and the included angle is 54°...pretty  

steep compared to the normal 118° angle of a drill bit for steel.  

Also, the cutting edge needs to be flattened so that it does not cut  

into the material, but scrapes it instead. Here are a couple of  

pictures of the ones I got from LP Aeroplastics.



Lynn



On Dec 10, 2008, at 12:47 AM, gary.algate(at)sandvik.com wrote:



 	  Quote: 	
		  

 Are there any list members in Australia who know where I could  

 purchased drill bits for drilling acrylic.



 I have decided to bite the bullet and fit my LP Aero windscreen but  

 can't find the bits  that I ordered for the job and nobody here in  

 Adelaide seems to know of the special bit angle required.



 Regards



 Gary



 Gary Algate

 Classic 4 Jab 2200

 Office Phone: +61 8 8276 7655

 This e-mail is confidential and it is intended only for the  

 addressees. Any review, dissemination, distribution, or copying of  

 this message by persons or entities other than the intended  

 recipient is prohibited. If you have received this e-mail in error,  

 kindly notify us immediately by telephone or e-mail and delete the  

 message from your system. The sender does not accept liability for  

 any errors or omissions in the contents of this message which may  

 arise as a result of the e-mail transmission.

 “This year, instead of sending you a Christmas card in the mail, we  

 have made a contribution to UNICEF Australia. We wish you a safe  

 ========================

List  
	


 	  Quote: 	
		   ========================

 ========================

 ========================

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

100_4762.jpg

Description:

Filesize:

270.74 KB

Viewed:

432 Time(s)

100_4764.jpg

Description:

Filesize:

224.03 KB

Viewed:

402 Time(s)

_________________
Lynn
Kitfox IV-Jabiru 2200
N369LM

akflyer

Joined: 07 May 2007
Posts: 574
Location: Soldotna AK

Posted: Wed Dec 10, 2008 12:50 pm Post subject: Re: Acrylic Drill Bits

have you checked the local sign shop?  Most of them deal with plastics for signs and should have a bit or a supplier for them.... Just a thought

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
DO NOT ARCHIVE
Leonard Perry aka SNAKE
Soldotna AK
Avid "C" / Mk IV
582 (147 hrs and counting on the rebuild)
IVO IFA
Full Lotus 1450
#1 snake oil salesman since 1-22-2009

I would rather die trying to live, than to live trying not to die....

n85ae

Joined: 14 Mar 2007
Posts: 403

Posted: Wed Dec 10, 2008 1:01 pm Post subject: Re: Acrylic Drill Bits

A common step drill works just as well as the LP Aero acrylic bits

in my experience. I have drilled a lot of acrylic with it, and never

had any problems.



I do have a set of the LP Aero bits, but I don't think they offer any

advantage over the step drill.



Regards,

Jeff

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

gary.algate(at)sandvik.co
Guest

Posted: Wed Dec 10, 2008 1:41 pm Post subject: Acrylic Drill Bits

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

gary.algate(at)sandvik.co
Guest

Posted: Wed Dec 10, 2008 1:46 pm Post subject: Acrylic Drill Bits

Thanks Leonard - I'll give them a  try 

 

Gary

 

 Gary Algate

 SMC, Exploration

 Office Phone: +61 8 8276 7655

 

 

 This e-mail is confidential and it is intended only for the addressees. Any review, dissemination, distribution, or copying of this message by persons or entities other than the intended recipient is prohibited. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message from your system. The sender does not accept liability for any errors or omissions in the contents of this message which may arise as a result of the e-mail transmission.

 “This year, instead of sending you a Christmas card in the mail, we have made a contribution to [url=Arial]UNICEF Australia[/url]. We wish you a safe and happy Christmas". 

 

 

 

    

 

 

 

"akflyer" <akflyer_2000(at)yahoo.com> 

Sent by: owner-kitfox-list-server(at)matronics.com 

11/12/2008 07:28 AM 

Please respond to

 kitfox-list(at)matronics.com     To

 kitfox-list(at)matronics.com   cc

    Subject

 Re: Acrylic Drill Bits 

     

 

 

 

--> Kitfox-List message posted by: "akflyer" <akflyer_2000(at)yahoo.com>

 

 have you checked the local sign shop?  Most of them deal with plastics for signs and should have a bit or a supplier for them.... Just a thought

 

 --------

 DO NOT ARCHIVE

 Leonard Perry

 Soldotna AK

 Avid &quot;C&quot; / Mk IV 

 582 IVO IFA

 Full Lotus 1260

 As done as any plane will ever be.... cause now the tinkeritis takes over.

 

 hander outer of humorless darwin awards

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=218735#218735

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Kitfox-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum