carlossa52(at)gmail.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Mon Dec 22, 2008 3:39 pm    Post subject: Rivet puller problems (off-list) | 
				     | 
			 
			
				
  | 
			 
			
				Harvey, this subject was discussed in the recent past - can't remember on which z-list, neither the outcome - but you should be able to find it with a search.
 
 Good luck
 
 Carlos
 CH601-HD, plans
  2008/12/22 Harvey Richards <lisa.richards(at)ns.sympatico.ca (lisa.richards(at)ns.sympatico.ca)>
 [quote] --> Zenith701801-List message posted by: "Harvey Richards" <lisa.richards(at)ns.sympatico.ca (lisa.richards(at)ns.sympatico.ca)>
  
  Would anyone have any ideas on the following hand rivet puller problems. About every 5th or so A5 rivet has a sharp stem protrusion a mm or so and some are breaking off with 10 mm or so protruding with the same sharp angle. I have disassembled and  lightly lubricated and it still happens. A4 rivets pull ok.  Thanks         Do not archive
   
  --------
  CH 701
  [b]
 
  |  | - The Matronics Zenith701801-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Zenith701801-List |  
  |  
 
 
 
 
  | 
			 
		  |