Matronics Email Lists :: View topic - CH-701 wing bottom trailing edge skin trimming at wingtip

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

CH-701 wing bottom trailing edge skin trimming at wingtip

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

n7cr(at)bellsouth.net
Guest

Posted: Fri Mar 24, 2006 8:12 pm Post subject: CH-701 wing bottom trailing edge skin trimming at wingtip

Question regarding trimming -



The 7V7-4 drawing shows the TE skin outboard edge trimmed back 35mm at the  rear 

channel at an angle, while the 7V9 rear skins wing tip trimming table has the 

aft edge of the bottom skin 370mm from the centerline of rib #6.



7V7-4 has the distance of the edge from the centerline of rib #6 as:

   1620 (length of TE skin)

- 1200 (distance to inboard side of rib #6

    -10 (centerline of rib #6)

    -35

------

=  375 mm.



That's a 5mm difference, which is what I'm measuring.



The question is, do I continue the straight line on 757-3 detailed on the table 

on page 7V9 all the way to the trailing edge, or do I maintain the total TE skin 

aft measurement (1620mm) and trim back the fwd edge of the TE skin by 40mm?



Rory

CH-701SP kit

Lacombe, LA

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum