 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
jaybannist(at)cs.com
Guest
|
 Posted: Fri Jan 23, 2009 9:57 am Post subject: Spinner |
 |
|
My apologies to all !!! (Is it Altzheimers, or what?) Someone asked if the front bulkhead isn't fastened to the prop assembly, what is it doing? That really got me to thinking. Since my memory of the forward spinner bulkhead seemed to be so fuzzy, I went looking through my photos. Lo and Behold !! My forward bulkhead is not Van's at all. It is William Wynne's excellent fiberglass unit made especially for this application. See photo. What a dunce!
Sorry for my sorry performance !
Jay Bannister
Email message sent from CompuServe - visit us today at http://www.cs.com
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
| Description: |
|
| Filesize: |
116.12 KB |
| Viewed: |
372 Time(s) |
|
|
|
| Back to top |
|
 |
leinad
Joined: 19 Sep 2006
Posts: 283
Location: Central Virginia
|
| Posted: Fri Jan 23, 2009 12:26 pm Post subject: Re: Spinner |
|
|
Jay,
Thanks for clearing that up. Nice looking installation. My "organic RAM" is fails often, so don't sweat it.
Dan
do not archive
| jaybannist(at)cs.com wrote: | My apologies to all !!! (Is it Altzheimers, or what?) Someone asked if the front bulkhead isn't fastened to the prop assembly, what is it doing? That really got me to thinking. Since my memory of the forward spinner bulkhead seemed to be so fuzzy, I went looking through my photos. Lo and Behold !! My forward bulkhead is not Van's at all. It is William Wynne's excellent fiberglass unit made especially for this application. See photo. What a dunce!
Sorry for my sorry performance !
Jay Bannister
Email message sent from CompuServe - visit us today at http://www.cs.com |
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
_________________
Scratch building XL with Corvair Engine |
|
| Back to top |
|
|
Gig Giacona
Joined: 10 Jan 2006
Posts: 1416
Location: El Dorado Arkansas USA
|
| Posted: Fri Jan 23, 2009 1:17 pm Post subject: Re: Spinner |
|
|
And just for the archives here is a pic of the Corvair with a wood prop and the Van's front bulkhead.
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
| Description: |
|
| Filesize: |
16.32 KB |
| Viewed: |
382 Time(s) |
|
_________________
W.R. "Gig" Giacona
601XL Under Construction
See my progress at www.peoamerica.net/N601WR |
|
| Back to top |
|
|
Afterfxllc(at)aol.com
Guest
|
| Posted: Fri Jan 23, 2009 3:34 pm Post subject: Spinner |
|
|
Also Aerolite is having a machined crush plate made that will have the proper spacers machined into it at the correct height for the wood prop and the warp drive. We are also going to sell the spinner pre drilled and indexed ready to bolt on.
I have just finished making the brackets for the aluminum intake and it is about 1 lb lighter than the SS ones.
More great products to come.
Jeff
And just for the archives here is a pic of the Corvair with a wood prop and the Van's front bulkhead.
A Good Credit Score is 7001028747/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072%26hmpgID=62%26bcd=DecemailfooterNO62"> See yours in just 2 easy steps!
[quote][b]
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
zenithlist(at)yahoo.com
Guest
|
| Posted: Sun Jan 25, 2009 1:47 pm Post subject: Spinner |
|
|
When do you anticipate the machined crush plate be available for sale?
From: "Afterfxllc(at)aol.com" <Afterfxllc(at)aol.com>
To: zenith-list(at)matronics.com
Sent: Friday, January 23, 2009 5:35:24 PM
Subject: Re: Re: Spinner
Also Aerolite is having a machined crush plate made that will have the proper spacers machined into it at the correct height for the wood prop and the warp drive. We are also going to sell the spinner pre drilled and indexed ready to bolt on.
I have just finished making the brackets for the aluminum intake and it is about 1 lb lighter than the SS ones.
More great products to come.
Jeff
And just for the archives here is a pic of the Corvair with a wood prop and the Van's front bulkhead.
A Good Credit Score is 7001028747/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072%26hmpgID=62%26bcd=DecemailfooterNO62"> See yours in just 2 easy steps! [quote]
[b]
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
