effectus(at)rogers.com
Guest
|
 Posted: Sat Feb 14, 2009 10:43 am Post subject: Rubberized Wing Walk Material For Sale |
 |
|
Hi Everyone,
I have purchased a quantity of 3M Safety Walk Medium Resilient Self
Adhesive Tread for my own project and there is lots left over. This is a
rubberized material instead of the mineral based tread that is usually
applied to the wing walk area.
The material is less aggressive than the sand paper type yet still has
the anti-skid properties that are needed in the wing walk area.
The material is a medium grey in color and I have approximately 21
pieces that are 6 inches wide by 30 inches long for sale. These are
slightly longer and narrower than the ones Van's sells in its catalog
and there is no logo cut into them.
Personally, I am going to be using 1 - 6 inch strip and 1 - 3 inch strip
on each side of my RV-10 for a total of 3 strips. If everyone orders
this same way I have enough for 7 aircraft.
The price for these are US$ 15.00 per strip plus shipping.
Please contact me at the e-mail address below with the words "Wing Walk"
in the Subject box if you are interested.
Thanks,
Dave
--
Dave Hertner
President
Effectus AeroProducts Inc.
Kit Aircraft Component Manufacturing
Machining - Fabrication - Laser/Water-Jet Cutting
Blog: http://www.kitaircraftmods.com
Email: davehertner(at)effectus-aeroproducts.com
Phone: (519) 933-2055
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
