Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

SD-8 crowbar breaker

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
kesleyelectric(at)chooseb
Guest





PostPosted: Wed Feb 25, 2009 6:55 am    Post subject: SD-8 crowbar breaker Reply with quote

Bob,

I have noticed that the z-figures that incorporate the SD-8 show a 5 amp breaker for the aux. alternator crowbar. The instructions from B&C call for a 2 amp breaker to be used with the SD-8 OV protection. As I recall, there has been some discussion in the past about nuisance tripping and upgrading the breaker size. I know that the diagrams are suggested architecture only, not component or wire size, but I wondered about this.

Tom Barter
Kesley, IA
Avid Magnum - wiring

[quote][b]


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
nuckolls.bob(at)aeroelect
Guest





PostPosted: Wed Feb 25, 2009 8:39 pm    Post subject: SD-8 crowbar breaker Reply with quote

At 08:51 AM 2/25/2009, you wrote:
Quote:
Bob,

I have noticed that the z-figures that incorporate the SD-8 show a 5 amp breaker for the aux. alternator crowbar. The instructions from B&C call for a 2 amp breaker to be used with the SD-8 OV protection. As I recall, there has been some discussion in the past about nuisance tripping and upgrading the breaker size. I know that the diagrams are suggested architecture only, not component or wire size, but I wondered about this.

The size of the breaker has nothing to do with nuisance
tripping of the crowbar OV protection system. Either 2A
or 5A will work. I standardized on the 5A for all these
years because it's generally less expensive than the 2A.


Bob . . .

----------------------------------------)
( . . . a long habit of not thinking )
( a thing wrong, gives it a superficial )
( appearance of being right . . . )
( )
( -Thomas Paine 1776- )
----------------------------------------

[quote][b]


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group