Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

mag drop solved

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
keithhickling(at)clear.ne
Guest





PostPosted: Mon Mar 02, 2009 9:39 pm    Post subject: mag drop solved Reply with quote

Hello all,
Well I'm embarrased to say that the problem was very simple. After checking over the carbs and half the ignition system, I finally noticed that the leads for the upper plugs on cylinders 2 and 4 were reversed. The mechanic who did a 100 hr inspection, prior to the final inspection for C of A, had rebundled much of the engine wiring and hoses to tidy it up, and must have reversed the leads, and left them tied so they naturally fell in that position, and so that the tags with the cylinder numbers were not easily visible. Amazing that it ran so well !
I now have a mag drop of 75 rpm on both mags - feels much better.

Many thanks for all the help. I've learned a lot about the engine.

Regards,
Keith

[quote][b]


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
hurstkr(at)redzone.com.au
Guest





PostPosted: Tue Mar 03, 2009 4:20 am    Post subject: mag drop solved Reply with quote

Keith,

> Amazing that it ran so well !

No need to feel embarrassed. He who has never made a mistake has never made anything so thank you for telling us.

Since you say it ran so well, I'm wondering if the spark on each plug fires on the exhaust stroke as well as the compression stroke. If this is so, would that be an explanation for its still running okay with the leads crossed ?

Cheers from Oz
Kingsley

do not archive
[quote][b]


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
rlborger(at)mac.com
Guest





PostPosted: Tue Mar 03, 2009 4:42 am    Post subject: mag drop solved Reply with quote

Kingsley,

Yes, it is a "Lost Spark" system. There is a spark at the top of every compression stroke.

Bob Borger
Europa Kit #A221 N914XL, XS Mono, Intercooled 914, Airmaster C/S
http://www.europaowners.org/N914XL
Aircraft Flying!
3705 Lynchburg Dr.
Corinth, TX 76208
Home: 940-497-2123
Cel: 817-992-1117



On Mar 3, 2009, at 6:19, Kingsley Hurst wrote:
Quote:
Keith,

Quote:
Amazing that it ran so well !

No need to feel embarrassed. He who has never made a mistake has never made anything so thank you for telling us.

Since you say it ran so well, I'm wondering if the spark on each plug fires on the exhaust stroke as well as the compression stroke. If this is so, would that be an explanation for its still running okay with the leads crossed ?

Cheers from Oz
Kingsley

do not archive
Quote:
http://www.matronics.com/Navigator?Europa-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/contribution




- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
keithhickling(at)clear.ne
Guest





PostPosted: Wed Mar 04, 2009 2:05 am    Post subject: mag drop solved Reply with quote

That is correct Kingsley, but the reversed leads were on cylinders 2 and 4, which are 180 degrees apart in firing, so the "second" spark should still have been just before bottom dead centre - so I think it still should not have fired on one cylinder with 1 mag. Cylinder 2 should not have fired with 1 mag and cylinder 4 with the other mag. But it didn't sound or feel like that.

Regards,
Keith.

[quote] ---


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group