Matronics Email Lists :: View topic - Basic wiring questions

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Basic wiring questions

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

rgf(at)dcn.davis.ca.us
Guest

Posted: Mon Apr 06, 2009 12:51 pm Post subject: Basic wiring questions

I have landing/taxi lights, LED nav lights, a Bob Archer VOR antenna, and an

APRS tx/rx antenna in the ends of the wings of an RV-9A (one antenna in each

tip).



1. For the powered items, can I run a single positive wire of adequate size

to a terminal block, then feed the devices from the block?



2. For the antennas, yes they will be using coax, but should I nevertheless

try to run the coax physically separate from the power wires?  In addition

to the above power wire I have a 3-wire bundle run from the strobe power

supply in the fuselage to the wing-tip strobe lights.  I installed a conduit

about 18 inches away from the Vans wire holes for this purpose.



Thanks,



Ralph Finch

Davis, CA

RV-9A QB-SA

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum